Note：

1.Before purchasing the product, please check whether your motorcycle connector is compatible with my product connector.

Features:

-Condition:100% Brand New

-Color:Black Light

-Color: Red/Blue/Green 1-6 Gear display Somekawasaki motorcycle models do not require the ecu -port connector we provide. We will still provide, you can ignore it after you receive it.

Fitment:

For Suzuki Boulevard C50 2005-2010

For Suzuki Boulevard M50 2005-2018

For Suzuki Boulevard M90 2009-2010

For Suzuki Boulevard C90 2005-2012

For Suzuki Boulevard C109R/T 2008-2015

For Suzuki Boulevard M109R/R2 2006-2010

For Suzuki DL650 V-Strom 2004-2011

For Suzuki DL1000 V-Strom 2004-2013

For Suzuki GSF650 Bandit 2009-2010

For Suzuki GSF1250 Bandit 2007-2010

For Suzuki GSF1250 N/NA Bandit 2007-2009

For Suzuki GSF1250 S/SA Bandit 2007-2016

For Suzuki GSX1400 2004-2009

For Suzuki GSX650F 2008-2010

For Suzuki GSX-R600 2004-2005

For Suzuki GSX-R750 2004-2005

For Suzuki GSX-R1000 2003

For Suzuki Intruder C800 2005-2010

For Suzuki Intruder M800 2005-2015

For Suzuki Intruder C1500 2005-2012

For Suzuki Intruder M1500 2009-2015

For Suzuki Intruder C1800R 2008-2015

For Suzuki Intruder M1800R 2006-2010

For Suzuki Intruder M1800R2 2008-2010

For Suzuki RMX-450Z All Years

For Suzuki RM-Z250 (EFi model) All Years

For Suzuki RM-Z450 (EFi model) All Years

For Suzuki SV650 2003-2014

For Suzuki SV1000 2003-2009

For Suzuki VL800 Intruder Volusia 2005-2010

For Suzuki VL1500 Intruder 2005-2012

For Suzuki VLR1800 2008-2015

For Suzuki VZ800 Marauder 2005-2015

For Suzuki VZ1500 2009-2015

For Suzuki VZR1800 2006-2010

(If you encounter any questions, please be sure to contact me first, please do not leave negative comments first, I very much hope to answer your questions, thank you)

Notice:Ecu plug in direct mount, no need to make refit, only need to set it with speed change for the gear indicator to progamming the right gear number.

The wire pins is not plug to the ecu socket adapter when you received, this will be more convinient for you to wring and fix the wire. After pins plug into the ecu socket adapter and then plug in your bike's ecu port, then it will be ok.

Set up:

-You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.

-Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.)

the screen displays L, indicating that learning is started.

accelerate through the handle throttle slowly

-The display will blink “1”.Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.

-When the display shows “2”, select second gear.

Repeat this process until all gears are thought (5 or 6).

The unit is programmed and should indicate the gears correctly.

Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.

(If there is an error in the learning process, please reset gear indicator, thank you)

Package Include:1 x Gear Indicator (Contains installation instructions)