Specification :

Product name: Wireless car washing machine
Material: ABS and copper
Power Supply:Lithium battery
Weight: 20000mAh (2.09KG) / 30000mAh (2.34KG)
Product pressure: 100Bar
Drive: Lithium battery wireless drive
Speed: 26000 rpm
Maximum flow: 10L/min
Jet stroke: 6-10 meters
Water pipe length: 5 meters
Car washing equipment type: household car washing machine
Water source type: faucet self-priming
Scope of application: car washing, watering flowers, watering vegetables, spraying, garden cleaning, etc.


Features :

1. Special material waterproof, water and electricity isolation is safer
2. Self-priming/faucet 2 water inlet methods, more convenient to take water
3. 3 Water types adjustable
4.With temperature protection function, automatic shutdown of over temperature and overload, eliminating safety hazards
5.Large amount of water, easy to absorb water
6. A variety of high-quality extension accessories, cleaning is more convenient and clean
7. Multifunctional high-pressure cleaning, very suitable for car washing, garden watering, agricultural irrigation and daily cleaning
8.  Simple installation, quick plug-in installation of all interfaces


Package included:

1x Washing Machine
1x Lithium battery
1x Charger
1x 5m Water pipe
1x 0° Outlet head
1x 45° Outlet head
1x Coke bottle adapter
1x Extension rod
1x Filter
1x Foam pot
1x Manual

Q & A

Q1: Why does the car washing machine not start after turning on the switch?he water pressure so small?
A1: Maybe the battery is out of power, please charge

Q2: Why is there no water after turning on the car washing machine
A2: Observe whether the water pipe is bent and the water cannot be released; press the car washer for more than 15 seconds and wait for the water to be sucked into the car washer

Q3:Water leaking from multi-function nozzle,Sudden increase in water pressure
A3:The multifunction nozzle is blocked,replace the nozzle

Q4:Water flows out after the machine is turned off
A4:There is water residue in the pump door after the machine is turned off

Q5:Foam bottle can't spray ? cleaning agent
A5:Drain the water completely before storing foam bottle clogged,clean with water

Q6: It can be started, but there is little or no water from the nozzle?

A6: 
It may be that the water connector is not pressed tightly. Press the water connector directly twice for the second time until you hear a click.
It may be that air has entered the fuselage or the water pipe. You can directly fill the fuselage with water with a tap to drain the air, and then spray water by self-priming.



Q7: Battery indicator light off?
A7:Use a screwdriver to disassemble the battery case, and press and tighten the four iron pieces at the four corners of the circuit board.

Q8: Battery charged but won't start? Product does not start?
A8:It may be because the inserts inside the machine are loose or wet. Use a screwdriver to disassemble the battery case to see if the battery circuit board is wet. If it is only a little wet, it can be air-dried. If the entire circuit board is wet, scrape off any rusted areas and air dry. If it is not wet, just clamp the corners of the battery circuit board and a few iron pieces in the middle. If you don't know how to disassemble the machine, you can try knocking the gun head down on the ground or on the table a few times.
During use, be careful not to seepage of water in the battery, it will be recharged every time it is used up, and the battery will be thrown upside down.

If you encounter any questions that you don't understand, please contact customer service to handle it for you! grateful!

Warm Tips:

1.After the car wash machine is used, it should run empty for a few seconds to drain the residual water in the machine, avoid oxidizing dirt and freezing for weather reasons, and store it in a dry and cool place.

2.Do not store in the trunk of the car in hot weather to avoid fire caused by high temperature.

3.Batteries need to be kept away from water.Remove the battery after use, so as not to affect battery life.

High Pressure Car Washer
Up to 80 minutes of battery life
High-rise/outdoor/garage

300W Copper motor
A good machine needs a strong heart. It can work continuously at 20000rpm and has a long life without burning the machine.

Crankshaft connecting rod 6 cylinder water pump:
Super powerful running force connecting shaft 6-cylinder cylinder technology
52V is full of power and strong pressure
Stable operation, less vibration and quieter
Small size and light weight

Other water guns/triple plunger pumps:
The traditional three-piston pump has low pressure
Only supports 12V voltage
Unstable operation
Short service life

High-strength compression technology
Range up to 6~10 meters
After repeated adjustments to the water pressure by German institutional designers, the precise arrangement of the water pump head was determined, which greatly improved the cleaning efficiency of the water outlet pressure to ensure the lasting pressure.

Power surging
Multifunctional nozzle
Switch water type at will
Meet different car wash needs
0°Outle t/ 45°Outlet

Metal long nozzle
Sealed and waterproof body
Vents
Water inlet
Start trigger
Car wash handle
lithium battery

Product parameter:
(Manual measurement, there is an error of 1-2cm, please refer to the actual product.)
Product name:High Pressure Car Washer
Product Size   :37*20*8cm
Limited Data :10L/min
Peak pressure:100bar

High Pressure Mode
Wash stubborn stains

Fan Spray Mode
Large area flushing

Dedicated
Foam pot spray
Can be used to spray pesticides

Automatic water absorption design
Unlimited venue, available anytime, anywhere

Automatic suction design, can be used in bucket/river water/pond/full scene

More than just car wash
More suitable for a variety of cleaning purposes
Yard flushing/watering plants/kitchen cleaning/crop washing

1 No water after startup?

A. Machine may entered air: please connect the faucet, running water will discharge the air, then used normally

B. Press button more than 15 seconds. let the water inhale the gun body

2 Low water pressure after starting?

A. Hose bend: straighten the hose

B. Connector is loose: press water connector directly, twice to hear a click

C. Dead battery: please charge

3 The machine does not start

A. Dead battery: please charge

B. Battery immersion: shake the battery upside down a few times

C. Inserts loose: corners and middle of the battery circuit board to pressed tightly

4 Foam bottle can't spray?

Need to wait for the water to drain before spraying the cleaning agent

5 Scan the QR code to see problem ideo: