Description
Customer Reviews(0)

Item specifics

Certification FCC
Shell Type Closed Type
Origin CN(Origin)
Other Part Number QDZH35G
Item Width Around 14 cm
Manufacturer Part Number QDZH35G
Refrigerating Capacity(KW) 0.1
Voltage 12V
Input Power(W) 17-78
Item Height Around 14 cm
Coefficient Of Performance(COP) R134A
Item Length Around 20 cm
Material Type Metal
Country/Region of Car Manufacture China
Noise(dB(A)) -
Interchange Part Number QDZH35G
OEM NO. QDZH35G
Item Weight 5.3KGS
Special Features Refrigeration
Cooling type FC
Oli Charge 150 ml
Displacement 3.5
Application LBP
Refrigerant R134a
Power Supply DC 12V 24V Universal

Product Description

12V 24V DC Car Refrigeration Air Compressor Fridge Freezer Marine Solar QDZH35G R134a We hope you can get correct goods.You must meet the following conditions:1.please must make sure your car type same one type of our product link.2.please must check our product photos in the link if same your old part.3.please kindly find your part of number depend our photo.then confirm same number on our web or contact us.(The number will appear anywhere in the part) Note:Please pay attention it , this item have old type and new type,now ship new types.The ones in stock will be shipped firstIf you mind it please not order it. Product InformationName:Refrigeration Air CompressorItem Number:HX-QDZH35GInterchange Number :QDZH35GCondition:NewNumber Of Piece:1 Set(As you see in the picture)Pins:8 PinsRefrigeration Temperature Scope: -18℃~10℃Shape: Cabinet Type (Open Outward)Power Supply Type: DCType: Compressor Car RefrigeratorVoltage:12V / 24VRefrigerant:R134aCertification: CE1) QDZH35G, DC series, use R134A refrigerant;2) Voltage application 12V and 24V;3) Cooling type: FC;4) Application: Low Back Pressure, Middle Back Pressure;5) Max cooling capacity 110W6) power consumption in watt is 65 to 110w depends on rpm setting and back-pressure inside systemMaterial: Plastic And MetalColor: BlackInstallation:1:1 ReplacementPacking:Box Or EnvelopeFitment: For Danfoss BD35 DC compressorsFor water dispenser, small refrigerator, small freezer, wine cellar and other small cooling appliances used for car, ship and camping.

Refrigerant

Application

Model

Displacement (cm3)

Rotate Speed (rpm)

Capacity (W)

COP

EER

Oil charge

Cooling Type

Power Supply

-23.3ºC (ASHRAE)

Kcal/h

Btu/h

W/W

Btu/W.h

R134a

LBP

QDZH35G

3.5

2000

222

1.35

4.6

150

12/24V

2500

274

1.35

4.6

(DC)

3000

325

1.3

4.44

3500

110

377

1.25

4.26

InstallationConnect the terminal plug from the electronic unit to the compressor terminal. Mount the electronic uniton the compressor by snapping the cover over the screw head. Power supplyThe electronic unit must always be connected directly to the battery poles . Connect the plus to + andthe minus to -, otherwise the electronic unitwill not work. The electronic unit is protected against reverse battery connection.For protection of theinstallation, a fusemust be mounted in the + cable as close to the battery as possible. 15A fuse for12V and 7.5A fuse for 24V circuits are recommended.If a main switch is used, it should be rated to acurrent of min. 20A. The wire dimensions in Table. 2 must be observed. Avoid extra junctions in thepower supply system to prevent voltage drop from affecting the battery protection setting. Battery protectionThe compressor is stopped and re-started again according to the decided voltage limits measured on the+ and - terminals of theelectronic unit. The standard settings for 12V and 24V power supply systemsappear from Table. 3. Other settings are optional if a connection which includes a resistor is established between terminals C and P. ThermostatThe thermostat is connected between the terminals C and T. Without any resistor in the control circuit,the compressor with electronic unitwill run with a fixed speed of 2,000rpm when the thermostat isswitched on. Other fixed compressor speeds in the range between 2,000 and 3,500 rpm can be obtainedwhen a resistor is installed to adjust the voltage (v) of the control circuit. FanA fan can be connected between the terminals + and F. Connect the plus to + and the minus to F.Since the output voltage between the terminals + and F is always regulated to 12V,a 12V fan must beused for both 12V and 24V power supply systems.The fan output can supply a continuous current of0.5A avg . A higher current draw is allowed for 2 seconds during start. LEDA 10mA light emitting diode(LED) can be connected between the terminals + and D. In case theelectronic unit records an operational error, the diode will flash a number of times. The number of flashesdepends on what kind of operational error was recorded. Each flash will last 1/5 second. After the actualnumber of flashes there will be a delay with no flashes, so that the sequence for each error recording isrepeated every 3 minutes Feature:100% high quality.Perfect to replace your old or broken car refrigeration air compressor.Unique charm, wear-resisting durable and undamage.Easy to install.No drilling and cutting required. Attention To Dear Customers:The photos of the products sold on the website may be slightly different from the actual ones after processing, but it does not affect the use of functionsIf you have questions, please contact customer service. For Resellers&Drop shipers:Glad to work with agents from all the world. We can provide photos totally free, but only with our authorization, or we will be held accountable according to the law. For Dear Customers:To ensure the quality of products, please do purcherse only in our official store.If you have any problems with our products, please write to us, our workers are always here to help you.If you like our products and our service, please give us a 5 star feedback. It means a lot to us.