|
Item specifics
Product Description
Brake Fluid Liquid Tester Pen With 5 LED Vehicle Diagnostic Tool For DOT3/DOT4 Note : There is no battery in the package ! Instructions: Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.1. How Dangerous of a bad quality Brake Fluid ? 1) The inferior brake fluid causes the brake failure easily,thereby lead to a accident 2) The Brake fluid is related to the life of Brade pads, if doesn't take it seriously, the life of brake pads is worried.
2. The testable brake fluid list
Good or Bad Distinguish accurately ! Our Brake Fluid tester designs 4 level digital led indicator that can provide the accurate water content for you.
LED Indicator Display: 1.5 LEDs indicating the water % in the brake fluid: 2.The green LED lights 0% light indicates that the battery is OK, no replacement 3.The yellow LED lights 1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use. 4.2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use The red LED lights 5.3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid. 6.4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately. Red LED: change brake fluid Functions: 1.check the car brake oil quality 2.5 LED lights display the percentage of moisture content in brake fluid,how the test results more accurate 3.Press the button for power on, green LED will light up. 4.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs. 5.Testing for DOT 3, DOT4, DOT5 brake fluid 6.Auto power off, Supports 1 LR03 AAA batteries (not included) Technical parameters: Green: Battery OK, that is, brake fluid does not contain water Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use. Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use. Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid. Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Accurate To 1% For TEST The Metrics is accurate to 1%, it can help you to know the situation of Brake Fkuid more clearly .
How to use Brake fluid tester ? Step 1 : Open car's front cover Step 2 : Find the brake Oil tank mouth Step 3 :Dip test probes and read the Led lights Step 4: Recover the car's front cover
kingbolen brake oil tester pen disaplay
How to use BM310/BM320 Car Battery Tester ?
To BM310 :
Connect the test clips to battery positive and negative position, check the LED display to
know the car battery condition.
To BM320 :
Connect the Cigarette Lighter to battery positive and negative position, check the LED display to
know the car battery condition.
BM310 12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display
12V led digital battery mate is a simple but efficacious battery testing tool which can determine the battery state, it’s easy to use and be understood. Main Functions: 1. Checking charge level 2. Functional test of dymano 3. Checking battery starting capability 4. Battery overload display
BM310 12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display
BM320 12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display
BF-100 brake oil tester pen disaplay
|
Accesorios para eBike
Piezas de motocicletas