Item specifics
-
Brand Name
JINHF
-
Origin
CN(Origin)
-
Interchange Part Number
--
-
Material Type
ABS
-
Item Weight
72g
-
Manufacturer Part Number
--
-
Item Length
--
-
Special Features
Fuel Level Meter Gauge
-
Other Part Number
--
-
Item Width
52mm
-
Country/Region of Manufacture
China
-
Placement on Vehicle
Front
-
Item Height
27mm
Features: 8 Blue/Green LED display Fuel 1 yellow LED means that the gas is few, and 1 red LED means the petrol is almost running out This oil meter has a delay function circuit that does not cause flickering of the LED display because the tank is sloshing during driving. Blue LED can be clearly shown in strong sunlight Installation: 1. Black +24V connect Power Positive 2. Green -24V connect Power Negative 3. Yellow Wire connect Oil can Sensor(must not connect with the original test wire, or this Fuel Gauge is inaccuracy) Important: Green means the display of LED has a red / yellow / 8 green Blue is the indication that the LED has a red / yellow / 8 blue This product must be used with the oil capacity sensor (that is, oil float) Attention: This product only matches with vehicles whose oil is full and resistance is small, or oil is running out, and resistance is large. If your oil float is in opposite situation, please place the order with great caution Specifications: Material: ABS Numbers of LED: 10 leds (8 pcs blue,1 pc yellow,1 pc red) LED Color: Blue/Green Voltage: DC 12/24V OHM Range: 0-566 OHM Application for Car and Motor Gauge Diameter: 52mm/2.06" Height: 27mm/1.06" Wire length: 37cm/14.57" Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 x Fuel Level Meter Gauge |