Description
Customer Reviews(0)

Item specifics

Brand Name LJHDFY
Country/Region of Manufacture -
Interchange Part Number -
Manufacturer Part Number -
Item Length 61.3mm
Item Width 33.3mm
Placement on Vehicle RiGht
Item Height 13.5mm
Item Weight 26g
Origin CN(Origin)
Special Features -
Material Type plastic
Other Part Number -

Product Description

Specification:

Display: Power, Voltage, Close, the key for cycle.

Voltage Range: 6-63V, products will display based on the voltage value , voltage fluctuations, power meter will be follow as the voltage fluctuation! (Comes with reverse polarity protection, can be guarantee use effectively )

The product is suitable for lead-acid 12V, 24V, 36V, 48V (can be changes via key, specific please see setup instructions as below)

The product is suitable for 3.7V lithium series multi-platform, 3 string, 4 string, 5 string, 6 string, 7 string and 8 string 9 string 10 string 11 string 12 string 13 string 14 string 15 string (can be changes via key, detail information please see as below)

Cable Length: 30cm

Backlight: White Color

Dimension: 61.3mmx33.3mmx13.5mm / 2.41''x1.31''x0.53''

Hole Size: 58.5mmx28.5mm / 2.30"x1.12"

Instructions:

S1：%/V  Rotate display in 2s
  Power percentage and voltage are displayed in turn recurrently and automatically；
S2：Inactivity sleep in 10s
  Automatically sleep after battery capacity display for 10 s, save power, press the function key to wake up power display for 10 seconds;
S3：Turn on backlight
  Power display turns on or off power backlight;
S4：Show logo(Applicable to small battery icon)
Logo icon is located in the underface of battery symbol on the left side of LCD, turn on and show the logo;
S5：Discharge mode selection
  Power displays two kinds of battery discharge curve, different environments convert to select appropriate battery discharge modes;

Setting procedure

1. Disconnect the module power supply, press and hold the setting button until powering the power module. Display shows the current power setting parameters;

2. Press the setting button to select P / L / F ，(P = 12V lead acid, L = 3.7V lithium battery, F = 3.2V lithium iron phosphate battery);

3 press the function key to set the number of the battery string, according to the function keys and set the key up or down to choose the number of batteries in series;

4. Press the function key for a long time to enter the advanced setting interface, use setting key to select S1-S5, enter key to select or cancel the current mode;

5. Reenergize the power after setting. The power automatically saves setting data.

E.g. 10 lithium battery power, turn on power percentage and voltage automatic rotation display (S1 mode)

Operation: Disconnect display module power, press and hold the setting button, power the power module, press the setting button for a short time to select L, press the function key to select 10, press the function key for a long time to select S1 and re-power.

1. Press and hold switch on the product, power on, automatically select the interface ( please follow as the code corresponds blow)

2. Select your battery type after corresponding, for example 3 series lithium battery, you need to enter the selection screen, press the key point to for L3 interface, then off, re-energized, choose success, such as the need to set 12V lead-acid batteries, the key point press to P12V interface, power, re-energized, both choose success

3. instruments can be used if you Select successful. Meter shows the power interface, tap switch, switch to voltage interface, click the switch, turn off the meter. cycle

shown as the code corresponds

Fitment:

Code: Suitable for

For L3: 3 string lithium

L4: 4 string lithium

L5: 5 string lithium

L6: 6 string lithium

L7: 7 string lithium

L8: 8 string lithium

L9: 9 string lithium

L10: 10 string lithium

L11: 11 string lithium