If your installation operation in right way ,

But still unable to make it work with your car ,

Pls do not open dispute and throw negative feedback ,

you should contact us firstly then we will Refund

HK01 is for diesel and gasoline cars
HK24 is for diesel and gasoline Trucks.
the function is same .

Laboratory test date conparison

7 Major Features

First function :

increase power.Release h the potential of your engine and accelerate

Second function:

improve the acceleratorhysteresis.

Improve your acceleratorresponse speed, and get power once you step on it.

Third function:

slow down the gear shift.Slow down the gear shift during driving and improve driving fluency

Fourth function:

enhance the torque.Improve torque output power, full of acceleration and  push-back feeling

Fifth function :

protect the engineOptimize engine intake and ignition to improve energy efficiency. .

Sixth function：

reduce fuel consumption.The unique power fuel-saving and efficiency adjustment

technology can improve the comprehensive performance of the vehicle,

improve the combustion efficiency,and save fuel.

Seventh function :

reduce vehicle noise. Good at reduce vehicle engine noise, enjoy tranquility

Original PIC16F59 chip

Original  inported chip , ensure the perfect function of product

HK01 support 12V gasoline and diesel vehicles

HK24 supports 24V gasoline and diesel vehicles

Installation and Calibration

Three steps,simple operation, let your lover car have amazing change

1,Find OBD2 connector inyour car and Plug in Super OBD2

2, Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

3,Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while

about 30-54 sec. (Super OBD2 will communicate and establish connection with ECU)

Super OBD2 finds out the hidden power of your car.

- Up to 20% more power

- Up to 15% more torque

- Up to 15% fuel savings


On average, OBDIICAT super tuning box advertise a fuel economy gain of 10% to 20%，power gain 10% to 30%. This depends on the engine installed on the vehicle and how far it has been tuned by the factory.
No matter what you choose, remember that your mileage may vary on driving style. Even with the best Eco tuning available, if you press on the gas pedal hard every time, you are not going to get an improvement in fuel economy

OBDIICAT Super OBD2 Can work for both Diesel and Benzine 2in1 .

Why we need to reset the device ?

Before you save power or enhance the performance of your car, you need to get the ECU information and driving habits by connecting the device with your car.

Then you need to reset the it after you changed a car.

Or reset it after you drived a period ( Deponds on different roads and operations)

So we add the reset button on the device to help you use it more conveniently.

New Function For Super OBD2 Compare With Nitro/Eco OBD2:

Reset Button Design, easier to operate than nitroOBD2
Reset Key for factory reset function.
Press the reset button for about 5sec to reset

Description:

OBDIICAT Super OBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.

OBDIICAT Super OBD2 is easy to install. Just plug it into the OBD2 connector of cars. Super OBD2 fits all car from the year of 1996.

It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, Super OBD2 adjusts itself to the car

according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.


What does Super OBD2 make?

According to your driving habits, Super OBD2 makes new map in the car's computer ECU to increase the performance of your car.

As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.



What is Super OBD2 Chip Tuning Box?

Super OBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

When it's plugged into OBD2 connector, Super OBD2 receives the information from the car's computer ECU. With the received data from ECU,

Super OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

Super OBD2 Chip Tuning Box does not exceed the manufacturer’s requirements. It works only within the tolerance of the engine.

Super OBD2 finds out the hidden power of your car. Super OBD2 does not damage the engine and the car‘s computer ECU or not cause any negative effects to the car factory setting.

Super OBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug Super OBD2 from OBD2 connector.

Super OBD2 finds out the hidden power of your car.

- Up to 20% more power

- Up to 15% more torque

- Up to 15% fuel savings

Super OBD2 is very easy to use.

Plug Super OBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.

Super OBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,

there might not be a need to make an additional adjustment. Super OBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,

and then Super OBD2 adjusts itself to match your car perfectly.

Super OBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.

The main difference between Super OBD2 Chip Tuning Box and Remapping tuning methods is that Super OBD2 Chip Tuning Box is easily removable,

and after unplug you go back to the factory settings. Super OBD2 is the cheap and safe type of tuning.

Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.

Super OBD2 is equipped with the engine protection function and 100% safe for your car engine.

Super OBD2 produced on the printed circuit board in SMD technology. Super OBD2 Chip Tuning Boxes are high quality.

Installation and Calibration

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector in your car and Plug in Super OBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (Super OBD2 will communicate and establish connection with ECU)

5 - Start up the engine.

6 - Super OBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus Super OBD2 will adjust itself to match your car perfectly for more fuel saving.

Does your car have OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.

OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

OBD2 necessarily for cars:

- Sold after January 1, 1996 in the USA

- Sold after January 1, 2001 in the European Union

- With diesel engine sold after January 1, 2003

Where located OBD2 connector in your car?

1 Driver's side, underneath dasboard, in the area under the steering column,

2 Driver's side, underneath dasboard,between the driver-side door and steering column area

3 Driver's side, underneath dasboard, between the steering column area and the center console

4 Driver's side, dashboard instrument/gauge area, between the steering column and center console

5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column

6 Center console, vertical surface left of vehicle centerline

7 Center console, vertical surface right of vehicle centerline or on passenger side of center console

8 Center console, horizontal surface in front passenger area.

Packing List:

1* Super OBD2 Chip Tuning Box Interface