The oil pressure detector is mainly used to measure the condition of the oil pump and the oil circuit in various automobile oil pressure systems, so as to find whether there is blockage or oil leakage in the oil circuit, so as to eliminate the fault in time and make the engine work normally.

Oil pressure tester: equipped with high pressure gauge head, metal braided hose (withstand 3000ps), 15-piece full copper adapter

The adapter includes:

M10*1.0

M10*1.25

M 12* 1.25

M12*1.5

M12*1.75

M14*1.25

M14*1.5

M16*1.25

M16*1.5

M18*1.5

NPT1/4

NPT1/8

NPT3/8

1/2-20 thread

3/8-20 thread

By replacing the connector during testing, you can test the engine oil pressure of different sizes

Test range: 0~1000KPa, 0~150psi

Instructions:

First remove the low oil pressure switch, use the appropriate adapter for the engine, connect the instrument, start the engine, watch the indicator pointer indicating the value, read the pressure value from it, turn off the engine, remove the oil pressure gauge, and finally connect the low oil pressure switch.