2 in 1 Machinical Car Tire Deflator Gauge 0-70 PSI/0-5 Bar 4X4 Large Offroad Tires With Valve Tools Box Glow in the Dark

A professional tool worth having, UNIVERSAL FIT CAR TRUCK 

Protect your vehicle, 

Extend useful life of tyre, 

Save your FUEL cost, 

Enhance your driving ability, 
Protective pouch and instruction sheet,
Lifetime Warranty.


Excellent Deflation Chuck- Durable,for tire deflation adjustments 
Suitable for trucks, motorcycles, automobiles and any passenger vehicles.

The key reason should be repeated three times Keep you and your family safer,Keep you and your family safer,Keep you and your family safer

Unit change for psi, bar and KPa
1PSI=0.069BAR=0.07KG/CM2

How To Use?

1. Use the pressure recommended by your vehicle’s manufacturer, This information is usually located in the driver's-side door jamb, glove compartment or owner's manual.
2. Check pressure when tires are cold and have sat for at least three hours.
3. Removing cap from inflation valve, Keep caps safe as they protect the valves.

4. With the slide valve pushed forward, thread the valve stem adaptor onto the valve stem in a clockwise direction 

5. Push the valve core remover forward until it engages the valve and turn anti-clockwise to remove valve. 

6.Pull out on the slide valve to release air. Pusin on the slide valve to stop air and check the pressure. Note, gauge wnot show correct pressure whilst deflating. 

7.When the valve core is removed it will push the core remover out and the gauge will read the tyre pressure. 
8.Remove the unit by turning the valve stem adaptor in an anti-clockwise directionEnsure a valve cap isplaced on the valve stem to prevent ingress of debris.

Notes:

1.Pressure increases with heat. Tires can lose one pound per month under normal conditions. 
2.Do not exceed maximum pressure on gauge;
3.Dropping or severe jarring may impair accuracy of gauge.

Get One For You And Your Family!