- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
Your shopping cart is empty.
Cart Total: $0.00
Proceed to Checkout
Item specifics
Product Description
2Meter D Z P B Type 3M Adhesive Car Rubber Seal Sound Insulation Weatherstrip Edge Trim Noise Insulation Car Door Sealing Strip
Construction method: 1, the need to install the seal of the site and seal the plane bit to thoroughly clean, dry. 2, choose a good sticking bit, identify the starting point after the seal from the front side of the bar at the bottom of the bar, a little press and paste, be careful not to pull the seal of the action, try to keep the seal of the original slowly aligned Paste the path for careful pasting. 3, all paste in place after the inspection is correct, the edge of the D will be carefully squeezed out of the excess carefully clean, wait for a while after the time by careful and meticulous press, you can handle the work, this time it is best not to close, open The door and so on after 20 minutes and then close the door, and then the best 3 --- 5 hours after the normal use of the door. 4, after the end of the paste to prohibit the hand to pull the seal, to prohibit the car wash within 3 days, 24 hours as much as possible not to open the door repeatedly. 5, after the construction will be a little tight, please do not worry, in the first 2-3 days when you can be normal. 6, please everyone in the first 1-2 days of time more attention to the door is not closed, safety first. |