Note:
Please check the size and purchase the product. If you don't know how to determine the suitable style, you can leave a message to give your car's brand + year + front wheel/rear wheel

Description：
Material: high quality rubber
Suitable models: 99% models can be used
Sizes:
A size:
Spring clearance: 47mm Spring thickness: 13mm Spring diameter: 173mm
B size:
Spring clearance: 35mm Spring thickness: 13mm Spring diameter: 160mm
C size:
Spring clearance: 27mm Spring thickness: 10mm Spring diameter: 131mm
D size:
Spring clearance: 23mm Spring thickness: 10mm Spring diameter: 113mm
E size:
Spring clearance: 15mm Spring thickness: 9mm Spring diameter: 112mm

A Plus size:
Spring gap:60mm/Spring thickness:13mm/Spring diameter:173mm
B Plus size:
Spring gap:34mm/Spring thickness:13mm/Spring diameter:131mm

Feature:
1. Adopting the buffering principle, the shock absorption performance is obviously improved. The shock absorption effect can make the car's riding comfort to a higher level, especially in the pits and hurdles.
2. When passing non-asphalt roads, bumpy roads, and making sharp turns, the stability is significantly improved.
3. To restrain the vibration of the vehicle body from uneven road surface during driving, thereby reducing the vibration noise during driving.
4. Appropriately increase the height of the car body and improve the passing performance of the car on road obstacles.
5. Protect the shock absorber and suspension system, extend the life of the car shock absorber, and prevent the shock absorber spring oil seal from being damaged due to excessive bumps.

Installation method:
1. Use a jack to lift the wheel into the air
2. Wipe the shock-absorbing spring clean with clean water (wipe several times) to ensure that the spring is clean and free of grit, which will reduce the life of the shock absorber.
3. Coat the damping spring with soaked soap, and spread the soaked soap in the groove of the strong buffer; wash your hands and install the strong buffer into the spring (install the upper groove first, then install the lower For the groove, you can also install half of the upper and lower grooves first, and then rotate to install the rest until the springs are all in the groove, and the excess part can be cut off with a knife).
4. Finally, after installation, turn its notch to the middle of the inner side, make sure that the springs are in the groove, and then put down the body.

Package Included:
1 Pair Spring Buffers