eBike Accessories
Motorcycle Parts- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
2Pcs/Set SEBS Red Car Shocks Struts Damper Glue Buffer Springs Auto Maintenance ToolFeatures:
Specification: Condition: 100% Brand New Material: SEBS Type: A, B, C, D, E (Optional) Color: Red
Installation method: 1.It can be installed in 4S shop. Before installation, stop the car on flat ground, and prepare buffer glue, Jack (which is more convenient if it can be mounted on the rack) and soap water (which can also be replaced by detergent dilution water). 2.The body of the mounting part is lifted by a jack (or the whole vehicle is lifted by a frame). The spring is stretched to facilitate installation. Can fully see the shocks struts damper spring, there is no need to rise too high; 3.Spray soap water to clean the spring (mainly to remove the sand stains on the spring surface), spray soap water to lubricate the buffer glue (enough lubrication will be more convenient for spring positioning and alignment), after installation, clean soap water in an all-round way to prevent rust and rupture of the shocks struts damper spring, which is the safety part of automobiles, causing human injury; 4.The cushioning glue is installed in the middle part of the spring. After each wheel is installed, the car body is lowered to confirm that the spring is put into the upper and lower slots of the cushioning glue. Package List: 1 x Pair of Shock Buffer Note: 1.Buffer glue specifications are mostly directly related to "spring spacing". Please be aware that the installed buffer glue specifications are suitable for the corresponding spring. If the specifications do not match, do not install. 2.No matter what style the whole spring is (straight, vertebral, inverted, bucket), the buffer glue must be installed in the middle part of the spring, so as to achieve the effect. Buffer glue opening outward or inward does not affect the use effect, but the opening inward will be more beautiful. 3.When the car body is lifted up, the spring is in a stretching state. The spacing between the springs during stretching can not match the buffer glue (so the car body should not rise too high). Try to let the spring enter the buffer glue slot or one side into the slot. When slowly lowering the car body, check and pay attention to the spring completely into the upper and lower slots of the buffer glue. 4.After the cushioning glue is properly installed, it is suggested that the cushioning glue and spring should be pulled together with nylon strap at the cushioning hole position. The advantage is to avoid loosening or displacement in case of long-term use. In addition, when the car body is lifted later, the spring tension is not easy to leave the cushioning glue slot. 5.After installation, it is necessary to check that the spring can be properly inserted into the upper and lower slots of the buffer glue. If the buffer glue with inappropriate spacing between spring and spring is installed, the comfort will be affected and the normal use of the buffer glue will not be brought into play. 6.A few days after installation, you can check again whether the buffer glue is suitable, whether it was installed at the beginning, and so on. 7.Later, if the car body is lifted (such as maintenance or tire change, etc.), the spring may be stretched out of the buffer slot, so we can not be afraid of trouble and save time. We must check and pay attention to the spring return buffer glue in the upper and lower slots when we put down the car body. This is a very easy but important point to be ignored.
About feedback We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! 1) We accept Paypal, Credit Card or Debit Card Payment,West Union,TT,All major credit cards are accepted through secure payment processor ESCROW. 2) Payment must be made within 3 days of order. 3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days. About shipping 1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders processed timely after the payment verification. 3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 6. If you have not received your shipment within the period, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery. 8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable. 9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks Return and Refund 1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half. 2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#. 3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from officematics. OR, you may choose to have a replacement. 4. We will bear all the shipping cost if the product(s) is (are) not as advertised. |
