Item specifics
-
Origin
Mainland China
-
Type
Controller
-
Accessories 1
Communication Line/Accelerator
-
Accessories 2
Meter/Light
-
Fit For 1
Electric Motorcycle/E-bike/Scooter
-
Fit For 2
Electric Bicycle/Balance Skateboard
Specification: Type:DC Motor/Speed Controller Voltage:DC 36V Rated Power:350W Undervoltage:30V Current-Limiting:8.8A Quantity: 6PCS/Set Fit For: Electric Motorcycle/E-bike/Scooter/Electric Bicycle/Balance Skateboard
Instruction: 1. Boot: Long press the boot (about 1s). At the same time, the buzzer sounds twice. 2. Shutdown: Press and hold 3s to shut down. At the same time, the buzzer sounds twice. 3. Light: In the power-on state, short press (within 1 second) once, turn on the front and rear lights, the headlights are always on, and the taillights are flashing. 4. Brake: Electronic brake + disc brakes. The tail light is long on the brakes. 5. Gear shift: The power-on state, the default is the low-speed file; press the button twice (press twice in one second) to switch the gear position; Green is low gear; red is high gear 6. Battery display: 33v-36v The first light is long 36v-37v one or two lights long bright 37v-38.5v one or two lights long bright 38.5v or more, one, two, three, four lights Low voltage alarm: The first light flashes when the battery is below 33V, and the buzzer sounds 6 times. 7. Low voltage alarm speed mode: The speed limit is about 15Km/h. When the power returns to 37V,the throttle must return to the initial position to release the low voltage and return to normaloperation. 8. Constant speed cruise: The speed is stable for about 6 seconds to automatically start the cruise control after the cruise is fixed, the throttle can be released; press the brake or push the throttle again to release the cruise control and enter the manual mode. 9. Speed: The low speed gear is 15±2km/h; the high speed gear is 25±2km/h. 10.Automatic shutdown: Automatically shut down 10 minutes after nooperation.
Error Code: (1) "E1" Motor Hall failure (2) "E2" MOS fault or motor phase line short circuit fault (3) "E3" Brake failure (4) "E4" Handlebar failure (5) "E5" Undervoltage protection (6) "E6" Instrument/control communication failure (7) "E7" Overvoltage protection (8) "E8" Controller op amp failure (9) "E9" Stall protection
Package Included: 1 X Controller 1 X Meter 1 X Accelerator 1 X Communication Line 1 X Headlight 1 X Taillight
|