Item specifics
-
Brand Name
MEIANDIAN
-
Origin
CN(Origin)
-
Design
Brushless
-
Certification
CE
-
Voltage
48V
-
Wattage
> 400w
-
Motor Type
Brushless Gear Hub Motor
-
Voltage
48V/60V
-
Motor Type
BLDC brushless motor
-
Rated Speed
4300RPM/MIN
-
Electric Scooter Motor Part
E bike Accessories
-
Electric Bicycle Motor
electric bicycle convertion kit
-
Controller Type
Brushless Controller
-
Electric Scooter Bicycle Motorcycle Car
DC Motor Controlle
-
Controller
Hall Sensor
Reverse
Low level Brake
Charger
-
Throttle
3-speed/forworld/reverse
-
Rated power
2000W
-
USE
electric bike/scooter/motorcycles/E-
-
Max Rated Speed
5400rpm/
Packing List1. 1pcs 48V / 60V 2000W Brushless Motor.2. 1pcs 48V / 60V 2000W Controller.3.1pcs throttle(3-speed and forward/reverse function)Products DetailsAbout Motor:1.Model:MOTOR MY10202.Motor Type: High-Speed BLDC brushless Motor4.Out put /W: 2000W.5.Rated Speed:48V 2000W 4500RPM 42A6.Rated Speed:60V 2000W 4250RPM 35A7.Weight:about 4.58KGS8.Diameter:95mm9.Rated Torque/N.m: 48V 2000W 4.25N.m, 60V 2000W 4.5N.m10.Applicable: Electric Scooter,Ebike,Folding Bike,Small E-Moto,machine,MIni Electric Car ,DIY11.Installation: Center,MID DRIVE SYETEM.12.Sprocket/Chain: 25H/T8F Sprockt /Chain.13.Speed:35-45km/hAbout Controller:1.Power: 2000W2.Voltage: 48V or 60V3.Current: 33A4.Mosfet: 152MOS5.Brake Low Level6.reverse funtifunction7.3-speed
throttle line:
1.instrumentation line 2.motor line 3.Anti-theft power line 4.throttle line 5.Anti-theft alarm line 6.3-speed line(standard: 60%-80%-100%) 7.hall line 8.reverse line 9.high brake line 10.low brake line 11.self-learning line 12.Cruise line 13.battery line(red: battery+,black: battery-) 14.electric lock line
(1.Contact the motor line 2.Contact the battery line(red:+ , black:-) 3.Contact the throttle line 4.Contact controller electric lock line to throttle electric lock line(if throttle without electric lock line, contact to battery + ) 5.Contact the hall line 6.Docking the two self-learning lines, twist throttle, the wheel will forward or reverse. (1.if wheel forward ,Separate the self-learning line. 2.if wheel reverse, Separate the self-learning line. then Docking the self-learning line again. if wheel forward ,Separate the self-learning line.) 7.other functions can be connected as needed.
|