48V-84V 2000W controller brushless can work with hall sensor/not have hall sensor

Name: Intelligent dual-mode brushless controller
Rated Voltage: 48V-84V
Low Voltage : 41V
Rated Power: 2000W
Limit Current: 45A
Number of brushless controller tube：18
Weight：1kg
Size：20*10*7cm

48V-84V 2000W controller function

1.throttle

2.cruise

3.3-speed

4.One-line LCD meter

5.hall

6.self-learning

7.high brake

8.reverse

9.low brake

10.electric lock

11.Jog 3-speed, 4-speed

12.pointer meter

13.hall Speed LCD Meter

14.anti-theft signal

15.anti-theft power supply

16.pedal assist（PAS）

17.motor

18.battery(red battery +, black battery -

How to connect controller？

1.connect the motor line (color to color）

2. connect the battery line(red:battery+ , black:battery-)

3. connect the controller throttle line, electric lock（if throttle not have electric lock,controller electric lock docking,if controller electric lock is 1 wire,can connect to battery + ）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again

if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

48-64V 2000W controller can work with hall connect sensor or not connect hall sensor

Rated Voltage: 48V-64V

Low Voltage : 42V±0.5V

Rated Power: 2000W

Limit Current:45A

1.self-learning

2.cruise line

3.reverse line

4.high brake

5.low brake

6.3-speed (low/middle/high)

7.throttle

8.electric lock

9.hall line

10.LCD instrument line

11.Anti-theft power supply

12.Anti-theft signal

13.battery (red battery+, black battery-)

14.motor

15.pointer meter line

1.connect the motor line (color to color，if motor without hall line, don't need connect hall line）

2. connect the battery line(red:battery + , black:battery-)

3. connect the controller throttle line to throttle, controller electric lock connect to throttle electric lock

（if throttle not have electric lock,the electric lock 2 wires of the controller can be docked together）

4.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，

if wheel forward ,Separate the self-learning line.) Self-learning is to adapt to the supply voltage

5.other functions can be connected as needed.