9H+ CERAMIC & GRAPHENE COATING

DESCRIPTION

Fantastic XML 9H+ Ceramic & Graphene Coating is a nano-high polymer formed by the adsorption of graphene molecules by silica.It has superior heat resistance , mechanical and optics properties, which can make the surface  of the automobile have good heat resistance, hydrophobicity, anti-friction andbrightness.

1.Preparation:

1. Wash the entire surface of the car using a wax- free auto wash. 

2. If there is oxidation layer on the paint, it is better to use car clay to remove the oxidation layer.

3. If there are scratches on the paint surface, it isnecessary to usepolishing wax to remove the scratches. After the abovesteps are completed, using the degreasing agent to remove the remaining grease on the paint.

4. Move the vehicle into a dry, dust-free place with good lighting.

2.Application:

1 Dividing the paigt into 40*40cm aréa and pour a small amourr of coating on the sponge,-namely cross way to apply ceramic coating, after finish the application, wait for 3 to 5 minutes, Wipe off excess coating  with a dry towel(The corners of the towel are hidden in the towel), then go to the next area, complete ceramic coatings by the same way.

2. Note: if the air temperature is high, there is no need to wait 3-5 minutes after applying the ceramic coating, 1 minute to 2 minutes is OK. Do not touch water within 24 hours after finishing the ceramic coating. If the new car does not require 2, 3, 4steps.

3.Maintenance:

1. For optimal results, wait 3 days before rinsing your car with water.

2. Avoid abrasive car shampoos that contain waxes or sealants on the Fantastic XML 9H+ Ceramic 8 Graphene Coating.

We at Fantastic XML 9H+ Ceramic & Graphene Coating would like to thank you for your purchase. We steadfastly believe that your purchase is an investment in the protection and maintenance of your vehicle.

Tip1:

Optimally, we suggest that you apply Fantastic XML 9H+ Ceramic & Graphene Coating in a garage or in the shade. But it's not necessary. To avoid direct sunlight, we suggest applying the coating in the early morning or late afternoon.

Tip2:

If coating the whole car, we suggest starting with the hood, then roof, trunk, rear and front bumpers, side panels and doors and then finally,the mirrors. For large areas like the hood, we suggest splitting it into 4 sections.

Tip3:

TheFantastic XML 9H+ Ceramic & Graphene Coating has self-cleaning properties, so you will find that with 9H you won't need to wash your car nearly as often. But when you do feel the need to wash your car, only use a PH neutral car wash, and wash your vehicle from the top down.

Pro