Universal 2'' 52mm Depth Gauge Pulse Signal Digital Boat Waterproof IP67 Depth Meter For Marine Boat Yacht Red Backlight 9-32V

Specifications:

Product Name:52mm Depth Gauge meter

Backlight:white

Diameter:52mm

Operating Voltage : 12V

Operating current :≤60mA;

Operating temperature : -30~+75°C

Storage temperature : -40~+85°C

Indicating Range：100M

Package includes:

1x Depth Gauge

1x Multi-plug socket

1x Installation Instruction

Operation:

A. This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power

B. Keypad"Mode": Quick press the keypad"Mode" to switch SH/DP/KL/ UN Hold the keypad"Mode" to turn on/off the monitor Short press the keypad“▲"“▼"to set the value required Hold the keypad“▲”“▼"to keep the digital increasing/decreasing fluently.

Parameter: SH: (Low level alarm) Range : 0-0.6-19.9, when the level no more than value(SH) appointed,the symbol flickering and the buzzer beeps all the time. If SH=0 -->No alarm Alarm setting range :0.6-19.9

Range: 1). Unit“M”: 0-99 2). Unit“FT":0-199 3). Unit“F”: 0-49 If the level exceed the a ppointed value , the buzzer will beeps twice Keel offset (KL):

Range: 1). Unit“M”: 0-6.0 2). Unit“FT":0-19.9 3). Unit“F”:0-3.3