Sensor Specification:

- Protection ank: IP67
- Resolution range: 21 mm
- Assembly: SAE standard 5 holes
- Rated current for alarm switch: 500mA
- Operating temperatures: - 40 to 85 Celsius
- Fit for Fuel Level Gauge and Water Level Gauge
- Sensor Length :150mm/200mm/250mm/300 mm ,350 mm ,
- Mounting: 5 pieces of M5 screws and 2 mm thick gasket
- Output signal: 0~190 ohm (Standard European),

Note:

- Empty oil level : 0 ohm / 240 ohm
- Full oil level : 190 ohm / 33 ohm
- When the oil / water level is empty , there will be a space of 3-15mm between the sensor float and the bottom of the sensor. This is a safe distance, and the sensor can work normally,Thank you~
- When the oil / water level is full, there will be a space of 3-15mm between the sensor float and the top of the sensor. This is a safe distance, and the sensor can work normally, Thank you~

Fuel Gauge Specification:

- Material: PC Polycarbonate

- Size: Approx. 8x8x7cm/3.15x3.15x2.76inch

- Working voltage: 9-32V

- Working current ≤60mm

- Working temperature: -30~+75°C

- Gauge diameter: 52mm / 2inch

-Warning Light : When Fuel level less than 13%, the warning light will flash .

Package Include:

1 X Fuel Level Sensor
1 X 52mm Fuel Level Gauge