Features:

*1. Exhaust System Pipe Repair Kit

Car exhaust pipe repair glue sealant high temperature tail pipe muffler repair leaks plugging air repair adhesive.

*2. Pipe Adhesive

Prevent gas leakage, with stand high temperatures, super tough.

*3. Sealant Exhaust Pipe Repair Glue

save energy / applies easily / stop air leak.

*4. Suitable for  Car Exhaust Pipe、Motorcycle Exhaust Pipe、Heating Element、Machine exhaust pipe、High temperature furnace flange、Catalytic converter、Engine Block.

*5. Use: Exhaust pipe repair glue is used to repair the damage of muffler exhaust system and seal the exhaust pipe and joint. Save that cost of replacing the muffle system and making the new installation safer. Curing welding effect, no matter the surface is clean or rusty, it has obvious adhesion, and the adhesion is better after cleaning the rusty surface. Resistant to carbon monoxide gas and high temperature.

How to Use

1. Clean all grease, dust on the surface of the exhaust pipe.

2. Smear the exhaust pipe glue to the surface of the area to be repaired evenly.

3. Curing under room temperature for at least 24 hours. (if the gap's range is exceed 0.5cm, it must be used with wire mesh)

4. Heat cure for 15 minutes. (if the surface is blistered, it should be scraped off and re-bonded)

Specification:

Name: Exhaust Pipe Repair Glue  

Weight: 75G

Lists:

1 * 75g Exhaust Pipe Repair Glue 

Note:

1. Avoid contact with eyes, skin and swallowing.

2. Use it in a well-ventilated place.

3. In case of contact with eyes, rinse immediately with water for 15 minutes. If the stimulus persists, see a doctor.

4. Please keep it out of the reach of children.