eBike Accessories
Motorcycle Parts- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
Welcome to our Store If you have any question please contact us Description Lot of 90 pcs 100% New, Never Used.
Unit:mm 1.Technical Details 10-pc. 2 Amp 10-pc. 3 Amp 10-pc. 5 Amp 10-pc. 7.5 Amp, 10-pc. 10 Amp 10-pc. 15 Amp 10-pc. 20 Amp 10-pc. 25 Amp, 10-pc. 30 Amp, 1pcs box 1pcs fuse clip 2.Rating Blowing Time 110% 100hours Min 135% 0.75sec Min 1800sec Max 200% 0.15ses Min 5sec Max 350% 0.04sec Min 0. 5sec Max 600% 0.02ses Min 0.1 sec Max Rated voltage: less than 32V DC Choose higher-order materials to 58V Cause breaking capacity: 1000A @ 32V DCOperating temperature: -40 C ~ + 125 CMaterial; 1, PC plastic; 2 zinc alloyImplementation of standards; SAE J1888, JASO D612ISO 8820-3, QC / T 420ATS 3.We also offer:3A/5A/7.5A/10A/15A/20A/30/40A,plese see my store. Wholesale is welcome A good quality Blade Fuse basic conditions are:1. Shell retardant, imagine if the housing is not flame-retardant, when the fuse is blown at high temperatures, instant arc,It is likely to be caused by external combustion of plastics Shell, the consequences could be disastrous, Determine whether the retardant shell simple way lighter flame and watch whether it will go out of their own will self extinguish a flame retardant 2. Melt the copper-based alloy or a zinc-based alloy, such materials have a relatively good electrical properties and good consistency and stability, and the spring terminal insertion burning phenomenon, if the material thickness is too thin, will increase with the plug spring at local overheating can cause severe burning plug spring.Fuse pins thickness of not less than 0.6mm, but should not use aluminum, aluminum lightweight unit volume low price, the preferred shoddy products, the most serious is stable electrical properties of aluminum fuse poor are particularly vulnerable to passive, which on the surface of the passivation film has a fuse is very negative effects, it is determined whether the method is to weld the aluminum, the aluminum can not be welded by conventional solder |
