Installation Procedure Video Display

With 12 years of professional modification. The product has been strictly tested and can be purchased with confidence.

Features:
1. Power increased by 45%
2. Improve throttle lag
3. Save 30%-8% of fuel
4. Improve throttle response speed
5. Original Port, plug and play, lossless installation

Mode:
1. Competition mode: the red light is on, and the power improvement effect is obvious. Suitable for outdoor off-road
2. Sport mode: the blue light is on, the throttle is reduced immediately, and the response is more sensitive. Suitable for city driving and overtaking competitions.
3. Fuel saving mode: the green light is on, which can reduce the power of the original car and achieve fuel saving.
4. White is the original car model

Applicable mode: Applicable
Toyota Land Cruiser Prado 2009 +
Toyota Land Cruiser 2008 +

Product List

1 X module
1 X power module switch
1 X plug
3 X cable ties
Equipped with English installation instructions. Provide installation Video. If you have any questions, please contact customer service.

Applicable car

Prado 150/Land Cruiser 200

Instantly increase explosive power and save fuel consumption

Four functions

Competitive mode, sports mode, fuel-saving mode, original car mode

Competitive mode

Adjust the engine ECU parameters to make the vehicle start fast and make off-road/overtaking/uphill easier

Movement mode

Adjust the engine ECU parameters, improve the response speed of the electronic throttle, increase the throttle sensitivity, and make the throttle control easier

Fuel saving mode

Adjust engine ECU parameters to make combustion more complete, reduce engine carbon deposits, save energy and fuel 3%-8%

Original car mode

Turn off the additional performance and return to the original vehicle control state.

Non-destructive installation, original car buckle fixed

The original car wiring harness is plugged in, no need to break the wire

The original car is opened to mold, and the size is accurate.

Key sensitive, easy control, enhance explosive power

Remove the screws. Remove the instrument panel bottom plate and plug

Unplug the accelerator pedal plug, plug in the control host, and switch the plug

Pry open the headlight control panel, install the control buttons, and plug in the wiring harness

Restore the removal position of the original car and complete the installation.