About MaxiAP AP200C

The MaxiAP AP200C is a code reader & service tool to easily perform 8 most common maintenance services, including Oil Reset, EPB, BMS, DPF, SAS, Throttle Match, ABS and Airbag Reset for all vehicle makes and models.

The MaxiAP AP200C package includes a Bluetooth (BT) dongle and a MaxiAP200 app. It is used to connect to a vehicle's OBDII port and connect with an Android or iOS device for quick and easy service functions. It is almost compatible with all vehicle models of European, Asian, and U.S. vehicles, 1996 and newer.

About MaxiAP AP200C Want to confirm AP200C whether support your vehicles ?

1. Contati with us, send your car make and the functions you need . We will confirm with you.

2. Check out the link: https://www.autel.com/vehicle-coverage/coverage2

(Input Prodcut is AP200C, input your car make and the function you want to confirm )

Why buy MaxiAP AP200C

● The purchased software supports all car series, no longer need to buy software one by one according to car series, saving a lot of money.

● Support 8 kinds of services:
OLS/ DPF/ EPB/ SAS/ BMS/ AIRBAG RESET/ THROTTLE MATCH/ ABS BLEED

● ABS, SRS free for the first year.

● AP200C is the Autel AP200 update version. Compared with AP200 and AP200M, AP200C adds more service functions.

NOTE

ABS, SRS free for the first year.

The other 6 systems are 29.99 USD/year

Oil Reset Service

This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.

ABS/SRS Services

Performs various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System.

Airbag Reset Service

After the airbag related components are replaced, it is necessary to perform this operation to clear the fault entries in the ECU and eliminate the related faults.

Electronic Parking Brake Service

This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

Battery Management System Service

The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

Diesel Particulate Filter Service

The DPF function allows you to carry out numerous functions to the Diesel Particulate Filter system without having to send your car to a main dealer. The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

Steering Angle Sensor Service

Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. Therefore, the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration. In addition, the vehicle identification number is also read from the instrument cluster and stored permanently in the steering angle sensor EEPROM. On successful completion of calibration, the steering angle sensor fault memory is automatically cleared.

Throttle Match Service

Initialize the actuator of the vehicle throttle to make the ECU learned value return to the initial status so as to control the intake air volume more accurately.

Easy to use

1.Download & install app

2.Register & Log in

3.Bind VCI with device

4.Purchase & install software

5.Plug the connector of the MaxiAP200C Bluetooth dongle into the vehicle's OBDII port.

6.Turn the vehicle ignition to Key On, Engine Off position.

7.VCI Connection
For Android devices, tap Me > VCI Connection or the VCI button near the top right of the Home screen.
For iOS devices, tap Setting > Bluetooth of your iOS device to open the Bluetooth function.
Tap the Bluetooth name on the screen to pair it with the device. The Bluetooth name starts with AP, followed by the serial number of the dongle.

8.Your MaxiAP200C is now ready for use.

Record Diagnosis History

This function stores records of test vehicle history, including vehicle information and the retrieved DTCs from previous diagnostic and service sessions, and displays all information in an easy-to-check table list, on which you can view summarized details and manually input other information about the test vehicle and services performed, etc. The History application also provides direct access to the previously tested vehicle and allows you to restart a diagnostic/service session without the need to do vehicle identification again.

Repair Reports

The MaxiAP AP200C app can save repair report for EOBD diagnostic and maintenance service sessions. A PDF can also be generated for easy viewing, sharing, and printing.
After finishing vehicle diagnosis and maintenance service, tap Save to create a repair report. The repair report is saved under Repair Reports.

Languages Support

● English
● French
● German
● Spanish
● Portuguese
● Dutch
● Polish
● Swedish
● Korean
● Japanese
● Russian
● Italian

Specification

Communications: BL 4.2 Dual-Mode
Wireless Frequency: 2.4 GHz
Input Voltage Range: 9 VDC to 26 VDC
Supply Current: 100 mA@12 V
Sleep Mode Current: 3 mA@12 V
Operating Temp: 0°C to 50°C
Storage Temp: -20°C to 70°C
Dimensions (L*W*H): 59mm (2.32'') * 44 mm (1.73'') * 21.5mm (0.85'')
Weight: 32.1g (0.07 lb.)

Packing List

1* AP200C
1* AP200C manual