Autel MaxiCOM MK906BT OBD2 Scanner Professional Car Diagnostic Tools Wireless Bluetooth Professional ECU Coding 31+ Reset

MaxiCOM MK906BT is the latest addition to the MaxiCOM product line of advanced wireless diagnostic devices. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and ECU coding capability. Utilizing the powerful Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), an 8” capacitive HD touch screen, and long-distance wireless communication, the MaxiCOM MK906BT efficiently provides comprehensive vehicle diagnostics and analysis.

Bullet Points

1.OE-Level Full-System Diagnostic

MK906BT is an affordable tool to access all vehicle systems like engine and transmission, performs OE-level diagnostics such as read/erase DTCs, view data stream, active test, ECU Replacement, Zero Point Calibration (Toyota), Signal Check (Toyota), Initialization (ECU), and Guided Functions (VAG), quickly presents accurate diagnosis results, and significantly improves the convenience of diagnosis.

2.31+ Maintenance Functions

As the latest version of 2021, the diagnostic tool is competent to perform Oil Reset, Injector Coding, Throttle Matching, ABS Bleeding, BMS Service, SAS Reset, IMMO, Key Fob Coding, and more. MK906BT diagnostic scanner is an all-around maintenance scanner for effectiveness and efficiency.

3.ECU Coding & Active Test

Enhanced online ECU coding function works for 98% automobiles (including BMW, Volkswagen, Porsche, etc.), allows for enhancing ECU function to fix problems or unlocking hidden functions, such as Auto Lock and Mirror Folding. The active test covers the full systems of most vehicles, commanding the actuator to perform specific tests to pinpoint faults, such as rolling up / down a window, turning the fuel pump on and off, cycling the a/c clutch on and off, and helping with an emissions leak test.

4.Wide Coverage & Easy to Use

The automotive scan tool serves 80 + car manufacturers and 140+ vehicle models worldwide, supporting Data Manager to uninstall manufacturer software, delete pictures and edit diagnostic records, helping you more quickly find repair records to facilitate the follow-up. Ergonomic design, as well as an 8.0-inch capacitive touchscreen with 1024*768 resolution, gives you a good user experience.

5.Updated Version of MS906/MK908

MK906BT contains most of the functions of MS906/MK908 with performance improvements over MS906BT: faster wireless pairing, longer Bluetooth range (164ft/50m), and fastest software update frequency among its peers on the market.

Language

English, Simplified Chinese, Traditional Chinese, Spanish, French, German, Polish, Italian, Japanese, Korean, Dutch, Portuguese, Swedish, Russian

After you get the product, please tell us your SN of machine to activate the language you need .

Update Service & Warranty

1 year free upate service

1 year warrantry for any quality problem

ECU Coding

Same as Autel Maxisys MS906BT/MS908/MK908, Maxicom MK906BT has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed.

Optimally code your car by changing some settings to fit your needs, such as setting alarms, doors locking, etc.
1. Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like activating the auto side mirrors folding function, disabling the automatic engine Start-Stop function, etc.
2. Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car’s performance.
3. Reprogram the adaptive data for certain components after repairs or replacements.
ECU Online Coding is available for BMW, VW, Porsche, Renault, etc.
Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

Why does the car not work normally after replacing ECUs/ modules?

When an ECU/module is damaged, you have to replace a new one. After replacing the ECU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car cannot start or some parts cannot work normally.

What can Autel Maxicom MK906BT do?

Featuring ECU/Module replacement functions, Autel scanner Maxicom MK906BT can help you initialize, match, learn, or code the newly replaced ECU/module to get it back on track, except the programming, online coding, online matching, and online parameterization.

Compatible with almost all vehicles

Autel OBD2 scanner MK906BT can help almost all vehicles replace ECUs/modules, such as Honda, Jeep, Chrysler, VAG, GM, Peugeot, Citroen, Mitsubishi, Suzuki, etc. However, it’s NOT available for modules on the vehicles that need to do programming, online coding, online parameterization, and online matching.

Active Test

By passing the electronic control module and communicating directly with the control unit is an efficient diagnosis method. The MK906BT car scanner can perform active tests to check the vehicle’s running states by receiving information from ECUs or by monitoring actuators (e.g., switching solenoids, relays, or on-off between two operations) to control the system or parts (e.g., ABS, windows, doors, roof).

OE-Level Full-System Diagnostic

By penetrating all available ECUs, including but not limited to PCM, ECM, EPS, PDM, TPM, BCM, ABS, SCCM, etc., MK906BT retrieves information and performs OE-level diagnostics on all available vehicle systems, like read and clear codes, view data stream and vehicle information, ECU Replacement, Zero Point Calibration (Toyota), Signal Check (Toyota), Initialization (ECU), and Guided Function (VAG). It not only enables you to troubleshoot promptly but also makes you customize the configuration.

31+ Maintenance Functions

As the latest version of 2021, the diagnostic tool is competent to perform Oil Reset, Injector Coding, Throttle Matching, ABS Bleeding, BMS Service, SAS Reset, IMMO, Key Fob Coding, and more. MK906BT diagnostic scanner is an all-around maintenance scanner for effectiveness and efficiency.

Oil Reset Service

to reset service mileage and service intervals for the Engine Oil Life system;

TPMS Service

to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements;
*Note: The TPMS function cannot program sensors.

EPB Service

to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.;

ABS/SRS Services

to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.;

SAS Service

to perform calibration for the Steering Angle Sensor, and clear fault memory;

DPF Regeneration Service

to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter

BMS Service

performs a reset on the vehicle battery for clearing the fault information and re-match the battery;

Brake Bleed

performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;

IMMO Service

clear the lost car key’s information and program the new key into the ECU database to protect user’s car from being stolen;

Injector Coding

writes the new code to the ECU after replacement of injector, so that the injector works;

Throttle Adaptation

initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;

Headlamp / Suspension / CHG tire size / TEC learn / WIN DR ROOF /Seats / Lang change

and many more......

Wide Coverage & Easy to Use

No need to worry about compatibility issues. The device currently supports 80+ car manufacturers and 140+ car brands worldwide. Also, you will be able to get more new car models through subsequent high-frequency software updates.

It is compatible with: Chrysler, Dodge, Ford, GM, Jeep, Abarth, Alfa, Citroen, Fiat, Lancia, Opel, Peugeot, Porsche, Renault, Saab, Vauxhall, Volvo, Aston Martin, Audi, Bentley, Benz, Sprinter, BMW, Bugatti, Ferrari, Jaguar, Lamborghini, Land Rover, Maserati, Maybach, Mini, Rolls-Royce, Seat, Skoda, Smart, VW, VW CV, Dacia, Ford EU, LT3, Acura, Daewoo, Daihatsu, Honda, Hyundai, Hyundai CV, Infiniti, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, Nissan GTR, Samsung, Scion, Ssang Yong, Subaru, Suzuki, Toyota, Isuzu, Mahindra, Perodua, Proton, TATA, HINO, UD, Fuso.

Technology Optimum Combination

We have always been seeking a comprehensive way of vehicle diagnosis. MK906BT can record digital images and videos, so we subtly combine different diagnostic tools to make it possible. It works with oscilloscopes to provide you with an insight into the inner workings of a vehicle’s electronic circuits, with an inspection camera to access the desired point of difficult-to-reach car interiors, with TPMS tool to program AUTEL MX-sensors or OE sensors.

Amplify parameter numbers and graphics via HDMI

Using MK906BT you can display the parameters of the system conveniently. Some parameters are more likely to be monitored in analog form, for example, pressure. Some parameters are more conveniently viewed in graphical form, by observing their change in time (potentiometers, oxygen sensor). Some parameters must be displayed in the graph to observe changes relative to each other (for example, air mass flow and engine speed).

Auto VIN

Just one click can facilitate the vehicle diagnostic process. MK906BT scanner tool incorporates the latest Auto VIN technology that allows technicians or repairmen to easily identify vehicle information such as manufacturer, model, year and place of manufacture, etc.

Additional Functions

The MK906BT automotive scan tool has additional features that take smart diagnostics to a new level: remote control support at any time, from anywhere, real-time push notifications and software updates over the Internet, Shop Manager to record customer and vehicle information and for easy access and management, Data Manager to uninstall manufacturer software, delete pictures and edit diagnostic records, MaxiFix (an online troubleshooter database) to access a vast database of repair and diagnostic tips along with proven filed fixes.

VAG Guided Function

Designed with VAG Guided Functions, Autel maxicom MK906BT provides on-screen instructions for you to complete some complicated maintenance or functions (SAS calibration, ECU Coding, etc.) gradually on VW, Audi, Seat, Skoda, etc.

Key Fob Programming

With IMMO Keys function, automotive diagnostic scanner MK906BT can disable or clear info of the lost vehicle keys, add new keys, program the replacement key fob for most Asian and American vehicles. Note: Not available for BMW, Benz, Audi, etc.

Sit Down and Take a Breath

Work hard; Play hard! The Autel MK906BT is not only a diagnostic tablet but also an entertainment tablet. Given its Android-based OS, you could install Twitter, Telegram, Spotify, Instagram, etc.

Updated Version of MS906/MK908

MK906BT contains most of the functions of MS906/MK908 with performance improvements over MS906BT: faster wireless pairing, longer Bluetooth range (164ft/50m), and fastest software update frequency among its peers on the market.

Specifications

Operating System
Android™ 4.4.2, KitKat

Processor
Samsung Exynos T5260 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15)

Memory
2 GB RAM & 32 GB ROM

Display
8.0" LED capacitive touch screen with 1024x768P resolution

Connectivity
Wi-Fi (802.11 b/g/n)
USB: 2.0, Mini USB 2.0
Wireless BT V2.1+EDR Class1, HDMI 1.4a
SD Card (support up to 32 GB)


Camera (rear)
Rear-facing, 8.0 Megapixel
AF with Flashlight

Sensors
Gravity Accelerometer, Ambient Light Sensor (ALS)

Audio Input/Output
Microphone, Single Speaker
3-Band 3.5 mm stereo/standard headset jack

Power and Battery
10,000 mAh 3.7 V lithium-polymer battery
Charging via 12 V AC/DC power supply

Input Voltage
12 V (9-35 V)

Power Consumption
5 W

Dimensions (W x H x D)
270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)

Weight
NW: 1.05 kg (2.3lb.)

Package List

AC/DC Adapter (12V)
Adapter for Chrysler-16 (America Only)
Adapter for GM/Daewoo-12
Adapter for Benz-38
Adapter for Mitsubishi/Hyundai-12+16
Adapter for Honda-3
Adapter for BMW-20
Adapter for Kia-20
Adapter for Nissan-14
Adapter for VW/AUDI-2+2
Cigarette Lighter
MaxiVCI V100
Lighter Fuse
Soft Cloth
Mini USB Cable
User Manual
Packing List
Carrying Case
Quick Reference Guide