eBike Accessories
Motorcycle Parts- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
Autel MX-Sensor 2 In 1 (315MHz + 433MHz) Clamp-In OE-Level Programmable Sensor for Tire Pressure Monitoring System (TPMS) 100% Cloneable + Fits 98% Mainstream Vehicles / MX-Sensor 433 MHz /TPMS PAD Sensor Programmer 1. Autel MX-Sensor 2 In 1 (315 + 433MHz) ■ Introduction Autel MX-Sensor 2 In 1 (315 + 433MHz), as a programmable universal sensor featuring in Clamp-in and Snap-in options which are both smart and efficient specially built for sensor replacement with maximum application coverage, ease of use, OE-level fit, performance and reliability, will help users economize the cost of diagnostic work and raise the repair efficiency greatly. ■ Bullet Points 2 IN 1 FEATURE: Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearnrequired. The MX-Sensor is 100% cloneable with the original sensor ID and put in the same position. 98% COVERAGE: Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road. EASY TO USE: The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the unique PRESS release valve design makes the manual sensor replacement much easier. SOLID & DURABLE: Equipped with an automotive grade battery, a replaceable aluminum/rubber valve stem to withstand cold, hot and resistancecorrosion, and a high-precision air valve to prevent air leakage, this sensor ensures superior stability and performance. WARRANTY: Autel guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 24,000 miles. Each sensor is marked with a seriesnumber to track the sensor quality from the factory to ensure that only the highest quality parts are installed. High-Speed Accident Mostly Due To A Blow OutTire Aging/ Tire Leak/ High Temperature/ Speeding/ Overloaded... Five Reasons to Choose Autel MX-Sensors2 in 1 Sensors/ 433 MHz Sensors Comprehensive Vehicle CoverageCover Over 98% of All OE Sensors on the Market ■ Notice 1. The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.2. Make sure to program the sensor by AUTEL sensor programming tools for your specific vehicle make, model and year before installation.3. Do not install programmed TPMS sensor in damaged wheels.4. In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.5. Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer' s user guide to confirm proper installation.6. Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged. ■ Installation Process 1. Loosethe tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. 2. Autel MX-Sensor 433 MHz ■Introduction MX-Sensors (433MHz), the programmable universal sensors, are both smart and efficient specially built for sensor replacement to perform like OE sensors, in terms of signal interval, durability and functionality supporting up to 99% of the US and Canadian vehicles. The 2-SKU sensor solution that covers over 98% of all OE sensors on the market will greatly simplify your inventory management and lower investment and sales loss. ■ AUTEL VALUE ADVANTAGE 1. Covering 98% of all OE sensors on the market2. 2 sensor types to reduce inventory (two valve types available)3. Wireless sensor programming with Autel TPMS service tools4. 100% ID clone-able sensor with no re-learn required5. Independently tested and certified to meet SAE standards ■ Specifications Battery Life ≥5 years Operating Temperature -40°C to +125°CStorage Temperature -40°C to +150°COperating Humidity 90%Operating Frequency 433 MHz/315MHzPressure Monitoring Range 100 to 900 kPaPressure Reading Accuracy ±10 kPaTemperature Reading Range -40°C to +125°CTemperature Reading Accuracy ±5°CG Sensor Reading Accuracy ±15%Transmission Power 5-8 dBmBattery 3.0 VDimensions (W x H x D) 55.1 mm x 29.4 mm x 21.8 mm (Clamp-in Sensor)Weight (Without Valve) 18.5 g (Clamp-in Sensor) 3.TPMS PAD Sensor Programmer Supported Languages: English,Korea,Spanish,Finnish,Polish,French,Portuguese,Russian,German,Italian,Swedish,Japanese,Dutch ■ Introduction The MaxiTPMS programming accessory device (PAD) is the perfect tool for busy shops, it frees up your TPMS activation tools for important projects. When attached to your Windows , the easy-to-use MaxiTPMS Pad can test and clone the four universal Autel MX-Sensor types quickly. ■ 8 Reasons to Choose AUTEL MaxiTPMS PAD 1. Easy-to-use PC software2. Self-contained PC operation3. Make/model/year selection allows for correct sensor replacement4. Direct reading from sensors for quick programming5. No need for vehicle relearns6. Ideal for mechanically broken sensors7. Can automatically create ID numbers compatible with the vehicle8. Runs from PC USB power, no batteries required TPMS PAD Family photoPAD/ USB Cable/ Quick Start Guide/ Package Box ■ How to program our sensors by TPMS PAD 1. Load the software on the PC.2. Connect the PAD to the PC.3. Program MX-Sensor. |
