Please pay attention:

http://elm327.appIf you can't open it, clickhttps://www.x431.us/elm327/

YA201 Code Reader Auto OBDII Engine Fault  Scan Tools PK KW680 OM123

1:Free  Upgrade Life Time:Just Put in the USB and Paste the files into Flash disk

2:Data stream sorting

3:Find The Cause Of The Fault Code

4:Support vehicles1998 &newer (OBDII &CAN)

5:YA201 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.

6:Multi-Language:English , French , Russian , Spanish ,German, Italian ,Portuguese, Japanese, Chinese

Support Car Models for OBDII diagnostic function:

(Note: All Code reader only Support 12V cars, Does not support 24V Truck )

4 Keys:

"OK Key":ENTER key selects iter

"Back Key":BACK key returns to previous screen

"UP Key":UP SCROLL Key

"Down Key": Down SCROLL Key

Introduction

YA101 provides full OBDII/EOBD diagnostic functions and meets protocols such asISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.

What is the car mode YA101 Work Well?

American Car :

Need Standard OBD2 Protocols from2000to now

European Car :

Need Standard OBD2 Protocols from2003to now

Japanese/Korean Car:

Need Standard OBD2 Protocols from2006to now

Chinese Car:

Need Standard OBD2 Protocols from2009to now

Russian Car ：

Need Standard OBD2 Protocols from2012to now

What can YA101 OBD2 Scanner do ?

Erase Codes:Deletes DTCs from vehicle's memory.

Live Data:Live Data menu lets you view, record and playback real time PIDs data fromthe electronic control module. In live data menu, you can insert the selected item to front by holdingpressing the  key for 3 seconds.

Freeze Frame:Displays a snapshot of operating conditions at the time of a fault.

Vehicle Info:Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors.

Component Test:Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu .This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle.

On-Board Monitoring:Scan tool controls the operation of vehicle components, tests or systems.

O2 Sensor Test:Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST.

Functions

I/M Readiness:Displays a snapshot of the state of the vehicle's OBDII Monitors.

NOTE:

* To review I/M Readiness status,make sure that the ignition key is switched

to ON with the engine off.

* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:

* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.

* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.

2 .DTC Look Up

Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (NOT every DTC with possible causes reason)

3. Voltage Test

This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector.

4.Languages:

English,chinese,France,Deutsch,Italian ,Japanese,Espanish,Russian,Portuguese

Data Logging:Turn on /off the data log function to record the device data through vehicle.

Self-test:Display Test.  Used to check the display screen. Keyboard Test. Verifies that the keys are working correctly.

5. Update

pls install update tool from Official webiste, and copy the newest firmware ,paste to the YA101.

http://www.ediagtool.com/plus/list.php?tid=7