Features:
1.Output signal type switching: red button function: magnetoelectric signal and Hall signal switching button. Press the button: output the magnetoelectric signal. Release the button: output Hall signal. For some generators, when the red button is pressed, the Hall signal is output, and the button is released to output the magnetoelectric signal.
2.The user can use a multimeter to check the output signal type. Use a multimeter (20V measurement) to test the output of the signal generator, the output is about 5.8V, and the output is a Hall signal. If the output is 0V, the output signal type is a magnetoelectric signal.
3.Regarding the working power input: The working power of the signal generator is 12VDC, and the user can use 12V power to power the car battery, or use any other 12V regulated switching power supply or AC/DC power adapter.
4.Regarding the signal output GND. If the Hall signal output is used, the signal output GND and the working power supply GND share the same ground. If the 12V working power supply provided by the car battery is used, the user only needs to connect the signal output positive wire.
5.If the magnetoelectric signal output is used, the signal output GND and the working power supply GND do not share the same ground. The user must correctly connect the output signal positive line and the output signal negative GND line, so that the signal generator can work normally.

Main functions:
Crankshaft position sensor signal:
Various common crankshaft position sensor missing teeth signals are stored internally, including 58+2 (60-2), 58+1, 57+2, 57+1, 37+1, 36+2, 35+1, 34+2 , 22+1, a standard no missing tooth signal 60+0.
The above signals can be selected from magnetoelectric or Hall output. The standard 60+0 signal can also simulate vehicle speed (odometer) sensors, used to detect and maintain odometers, analog ABS sensors, photoelectric sensor signals, etc.
At any frequency greater than 2Hz, pressing the SET button can output 10 signals, of which 60-0 is standard magnetoelectric or Hall signal, and the other 9 are magnetoelectric or Hall tooth missing signals (crankshaft position sensor signal).

Simple operation and convenient use:
Various signals have been stored inside the instrument and can be selected directly on the screen, saving you the trouble of downloading and installing.
One-key conversion of magnetoelectric and Hall signals is convenient and quick.
9 frequency options, select the frequency more accurately:
01 means frequency range 2HZ-1KHZ
02 means frequency range 2HZ-2KHZ
03 means frequency range 2HZ-3KHZ
04 means frequency range 2Hz-4KHZ
05 means frequency range 2Hz-5KHZ
06 means frequency range 2Hz-6KHZ
07 means frequency range 2Hz-7KHZ
08 means frequency range 2HZ-8KHZ
After 09, the frequency range is 2HZ-100HZ

Skills:
The instrument's power supply is 12V, which can be directly powered by the 12V battery on the car, or can be powered by a 12V stabilized power supply.
About signal ground:
If the Hall signal output is selected, the signal ground wire and the power ground wire are directly connected, and the battery on the car is used for direct power supply. Generally, only the positive signal is connected.
If the magnetoelectric signal output is selected, the signal ground wire and the power ground wire are separated. At this time, both the positive signal and the signal ground wire must be connected in order to work normally.

Specifications:
Product name:Vehicle Signal Generator
Colour: Black
Material: ABS + electronic components
Size:As shown in the picture
Quantity:1

The package:
1*Vehicle Signal Generator
1*Testing Clip

Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.

2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!