Product Description

AUTOOL SDT202 Car Smoke Leak Detector — an outstandingly professional auto pipes leak Smoke Tester. It will help us position cars motorcycles leaks on the pipe systems in minutes, quickly and exactly, such as Intake System Test, Exhaust Systems Test, Cooling System Test, Car Sealing Test, Fuel Tank System Test, Various Pipe Fittings Test.

Features

[HOW TO WORK]: Firstly fill 20ml test oil, then simply connect the DC12V battery, it starts to work. Soon thick smoke outputs into sealed pipe system. You can find the leak point easily.

[WHY IS IT NEEDED]: Must-have tool for vehicle techs. The AUTOOL SDT 202 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. By observing the pressure gauge, the leakage situation is clear at a glance.

[WHAT IS ITS STANDOUT]: SDT202 smoke tester is detachable, compact, and easy to store, time-efficient and labor-free, and is widely used in various auto repair shops. Comes with EVAP adapters, it can help you apply with EVAP System of all vehicles to quickly find out the leak parts.

[WHERE TO USE]: Quickly smoke test for EVAP systems, Turbo leaks, Intake System, Exhaust Systems, Cooling System, Car Sealing, Fuel Tank System, Various Pipe Fittings, and more. Suitable for all car models, eg. motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats.

[3-YEAR WARRANTY]: For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.

How to Use:

1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.

Notes:

* Please do leak detection away from smoke-sensitive parts.
* Do not run the detector over 8 minutes. It needs interval rest.
* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.
* The round parts of this detector is with temperature, be careful to avoid scalding injury.

Caution：

1. When you use this AUTOOL SDT 202 Car Smoke Leak Detector for the first time, fill with 10ml oil . Please be careful NOT to beyond this range.
2. The testing liquid : both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

Package List:

1pc * AUTOOL SDT 202 Car Smoke Leak Detector Main Unit
1pc * Hook (with hand-tighten nuts)
1sets * Rubber hose plug (with serial specification)
1pc * Standard cone adapter
1pc * Power cord clamp
1pc * Oil bottle(oil not included)
1pc*EVAP special connector
1pc*Smoke hose
1pc* Valve Core Wrench
1pc* Rubber connector part
1pc* Universal airbag adapter
1pc * User manual