Descripción
Comentarios de clientes(0)

Item specifics

Brand Name AUTOOL
External Testing Certification ce
Origin CN(Origin)
Model Name AUTOOL SDT-206
Electronic No
Hardware Version newest
Item Height 5cm
Item Length 15cm
Power w
Material Type top
Item Type Gas Analyzers
Special Features Bluetooth
Item Weight 5kg
Software Version newest
Voltage v
Item Width 10cm
Transportation Transportation
warranty 3 years warranty
original 100% original high quality
Payment Terms T/T Western Union MoneyGram

Product Description

Smoke Detector AUTOOL SDT-206 Leak Detector of Pipe Systems except EVAP for all Vehicle Smoke leakage Diagnostic Tester

AUTOOL SDT 206 Car Smoke Leak Detector Features：1.[Wide Range of Applications]: For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models.2.[Powerful and Easy to Operate] : The AUTOOL SDT 206 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on.3.[Advanced Technology]: It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with flow meters for accurate data display.4.[Overheat & Anti-frost Protection]: This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device.5.[3 Years Warranty]: For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.SDT-206 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.SDT-206 is for all pipe systems except EVAP.

Cautions:

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the ser-vice life of smoke generated part, so please change smoke and oil regularly.

1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range.
2. When the smoke output has water drops, please replace with fresh oil.
3. Before filling fresh oil, please pour out the remaining oil in the detector.
4.Liquid paraffin and baby oil are OK.
Please fill fresh oil with equipped oil bottle.

How to do leakage test？

1.Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector.

3.Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.

4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

8.Notes:* Please do leak detection away from smoke-sensitive parts.* Do not run the detector over 8 minutes. It needs interval rest.* The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.* The round parts of this detector is with temperature, be careful to avoid scalding injury.Specifications:Hook: To hang the detector when detectingPower Indicator: To show detector statusWorking Indicator: It is lit when the detector worksPower Switch: Power it on, and the detector worksPressure gauge: To show the pressure when detectingFlow gauge: To adjust the smoke flow, and judge the leakage severity by flow amount changeSmoke output tube: The smoke outlet which connecting with detection portPower clip: To connect with vehicle battery.The voltage is DC12V.Power: DC12V, vehicle batterySmoke output value: 6l/minBuilt-in air supplyControllable flow valueNotes:Please do leak detection away from smoke-sensitive parts.It can suitable for EVAP.Do not run the detector over 5 minutes. It needs interval rest.The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.Maintenance:With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.Before filling new oil, please pour out the remaining oil in the detector.When the smoke output has water drops, please replace with new oil.