eBike Accessories
Motorcycle Parts- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
BDM FRAME PRO:
Old BDM Frame:
Package List: 1pc x BDM frame
BDM 100: 1. BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows to read and program files in the ECU supplied with for MOTOROLA MPC5xx processor (essential). The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100.2.Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the easiest way of programming. So if a car can be programmed by the OBD port, we will do it this way. 3.After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chip tuning of ECUs with for Motorola MPC555 - 565. 4.This generation of for Motorola processors contains 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therefore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB. 5.Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads. 6.The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts. 7. BDM100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer). 8. BDM100 allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software). Package list: 1 x BDM 100 Interface 1 x ECU connecting cable with 3 adapters 1 x USB connecting cable 1x 12V Power Supply NEW LED BDM: NEW LED BDM Frame is newest upgrade ECU Programming adapter . More Function than old BDM Frame. It is best used for FGTECH/BDM100/CMD/DIMSPORT ect... ECU Chip Tuning Tools. Easy installation and operation,no hurt the ECU circuit board. Function: For Car rush,modify,programming bracket stand. Fits for ECU brush&write,ecu modified&programming. Probe holder,dimsport assistant. Material: Aluminum alloy stand Arcylic board,mesh assistant Please pay attention: DOES NOT contact PCB in the pacakge LED must works up to 12V.Connect with probe,then disconnect 12V power for LED,it will light and works. The Probe pen can adjustable Package list: 1 x Alumiunm BMD Frame New LED 1 x Mess Arcylic Board(With LED&Connector) 4 x Probe Pens 4 x Connection Cable
Lite LED BDM FRAME: Introduction: This LED BDM FRAME is best bracket For ECU Update / ECU Brush And Write / ECM Modified and programming / Probe holder / Dimsport aids. It is much better than the old bdm frame.
|
