Color	Ediag BF100 Ediag BF200 No Display Screen
Ediag BF100 Ediag BF200 No Display Screen

Descripción
Comentarios de clientes(0)

Item specifics

Origin CN(Origin)
Item Name Duoyi DY23/DY23B Digital Brake Fluid Tester
Functions Test DOT 3/DOT4/DOT5.1
Feature 1 Sound and Light Double Alarm
Feature 2 Type 2 with Screen Play
Feature 3 Chromed detector resistant to oils and oxidation
Feature 4 with 250mm goose neck probe
Feature 5 Hand-held size provide one hand operation experience
Attention no battery(battery will affect customs checking)

Product Description

BF100/BF200 & Duoyi DY23/DY23B Vehicle Automotive Brake Fluid Tester Digital Brake Fluid Check Car Brake Oil Quality LED Indicator Display ScreenAttention:1. there is No battery inside, because battery will effect shipping time and customs checking, pls understand

2. there are 2 type brake tester pen , type 1 does not have LED digistal screen, type 2 has LED Digital indicator screen.

Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.Operation Manual:(Ediag BF100 /BF200)Step 1: Put 2 pcs AAA batteries into main unit.Step 2: Deep press the power button for 3 sec to power ON the unit.Step 3: One press the power button to select the current oil type.Step 4: Insert the test probe into the brake fluid (wipe the probe clean, otherwise it will affect the results) Detect the result by LED display.Step 5: Hold pressing power button 2 seconds to turn on / off the LED flashlight.Step 6: Deep press the power button for 3 sec to power OFF the unit. TIPS: Tip 1: After each test, please wipe the probe clean to avoid the residual stains affecting the next useTip 2: If device not use for a long time, it is recommended to take out the battery and store the product in a dry place.

Functions:

Function 1:3 Color LED Display, 5 Level Brake Fluid StatusFunction 2: SupportDOT3, DOT4 andDOT5.1 Types .Function 3: Unlversal Probe , Twistable DurableFunction 4: Fast analysis, accurate, testing Intultive resultsFunction 5: One hand operate , easy to handleFunction 6: Non-slip design at both sides TYPE :BF100

Ediag BF 100 Brake Fluid Tester description : 5 STATUS EXPLANATION : With multiple L ED indicators, the measurement results are more accurate and more convenient to use! Red: Brake oil with at least 4% water contentRed: Brake oil with about 3% water contentYellow: Brake oil with about 2% water contentYellow: Brake oil with less than 1% water contentGreen: Without water good condition LED Display Explanation:Green: The current test brake oil is in good condition.Green/ Yellow: Brake oil with less than 1% water content, Brake oil performance is good, you can use it with confidence.Green/Yellow/Yellow: Brake oil with about 2% water content, still able to work.Green/ Yellow/ Yellow/Red: Brake oil with about 3% , It is recommended to replace the brake fluid.Green/ Yellow/ Yellow/Red/Red: Brake oil with at least 4%, replacedimmediately.

TYPE :BF2001. Sound Alarm

2. LCD display the test result to tell you the quality of brake fluid.When the moisture content of the brake fluid is detected to exceed the standard, alarm will be sounded to replace the brake fluid

To DOT3 : lower than 1% High Purity

To DOT4 : lower than 2% Status is acceptable

To DOT5 : higher than 4% Need to Replace

TIPS:

In order to ensure good braking performance, It Is recommended when measuring the oil

Index to reach the range of 23, Please change the brake oll in time to protect your drlving safety.

3. High Resolution Screen

Display the clear test result even in the dark night, as well as in the brightest day.

4. Panel Explaination

TYPE :DY23

Operation Manual:1. Install one 9V(6F22) battery at the back of tester.2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, which indicates the product self-test is successful.3. Press SELECT button, it will locate DOT3 model automatically.4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.5. Immerse the probe into brake fluid and you will get different colors of LED lights, they indicate

Green Light: indicates the brake fluid water content is below 1%
The First Yellow Light: indicates the brake fluid water content is approximately 1.5%
The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%
The First Red Light: indicates the brake fluid water content is approximately 3%
The Second Red Light: indicates the brake fluid water content is more than 4%