especificación	CR-C and S60H

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name Kawish
External Testing Certification CCC
Origin CN(Origin)
Model Name CR-C S60H
Electronic No
Hardware Version V6.0
Item Height 22cm
Item Length 40cm
Power 50W
Material Type plastics steel
Item Type Mechanical Testers
Special Features Other
Item Weight 8kg
Software Version V6.0
Voltage AC220V/110V
Item Width 40cm
function 1: electromagnetic injector tester
function 2: for bo-sch/for del-phi/for den-so injector tester
plug type:: EU and US plug to choose
Item Type: Electrical Testers & Test Leads
Material Type: Plastics and iron
Special Features: injector tester

Product Description

CR-C Common Rail Injector Tester +

Common rail diesel nozzle Injector tester S60H

Note:

CR-C tester just can test electromagtic injector, can not test piezo injector.If you need test both electromagtic and piezo injector ,please click the link:

https://www.officematics.com/item/32924507833.html?spm=a2g0o.store_pc_topSellerIng.8148356.35.2e9e45614GvWqr

How to test a common rail Injector ?

Need two conditions:

1,Electrical pulse signal (CR-C Common Rail Injector Tester )

2, High pressure fuel (S60H Common rail diesel nozzle Injector tester)

As Shown below picture, it's the basic method.

PRODUCT 1:

CR-C Common Rail Injector Tester

CR-C common rail injector tester is a easy operated tool, could do the test with the injector hand pumps. It's small size and light weight, could meet the requires from repairman on the simple device of testing.

Technical Parameters:

Produce Model: CR-C Common Rail Injector Tester

Testing Range: atomization, pilot, emission and full load condition.

Test Injectors: for Boscch, Densso, Delphii common rail injectors.

Working Voltage: AC220V/AC110

Working Temperature: -30C°--70C°

Size: 110*250*190mm

PRODUCT 2:

Adjustable Width: 10 MS

Common rail diesel nozzle Injector tester S60H

Diesel Injector Nozzle Pop Tester fuel injector nozzle tester with 0 - 400 BAR / 0 - 6000 PSI Dual Scale Gauge BOSCH injector checker is suitable for all common rail injector and mechanical injectors, auxiliary products have compression release valve, it can check the fuel injection conditions of various types of injector quickly and easily. It also can be used with common rail injector 118 solenoid valve tester to test various types of common rail injectors. The injector checker equipped with two different types of tubing. You can freely switch suitable for detecting the injector, it is a good choice to Initial inspection injector working state.

As we know driver common rail injector,not only need a tester but also need hight pressure fuel,

so we used a manul fuel pressure pump S60H as show in follow picture

1, the high pressure oil common rail injector directly or into the holder is connected to the common hand pressure calibrator.

2, according to the corresponding plug injector brand choice, will harness and injector connected up correctly.

3, according to the fuel injector brand, drive mode selecting corresponding, at this time can hear the injector solenoid valve suction armature "Pa, Pa" voice.