Brake Fluid Tester BF200 BF100

BF100/BF200 Brake Fluid Tester for DOT3/DOT4/DOT5.1

Brake Fluid Tester Pen for DOT3/DOT4 , doesn't fit for DOT5.1

Notice:
The package doesn't include battery, please buy batteries in your local market, thanks :)

How much do you know about brake fluid?

Every drivers know how important of the brake fluid when driving, It is directly related to the safety of the vehicle and personal safety, so in the automotive industry. that's why so many people called the brake fluid as "safety guard".

The general brake oil replacement cycle is 2 years. Brake oil itself has strong water absorption characteristics, it will absorb the moisture in the surrounding air, for example car wash, humidair, etc., which will directly cause the brake oil quality drop and might cal use accidents:

1. Rear-end Accident
2. Brake Failure
3. Vehicle out of Control
4. Traffic Accident .

1. BF100/BF200 Support DOT3 DOT4、DOT5.1 different brake fluld.

●DOT3 is the most common type of brake fluid used by daily drivers.
●DOT4 has a higher boiling point and has found its place in racing vehicles and police cars
●DOT5.1 : It is important never to mistake DOT 5.1 (glycol-based) with DOT 5 which is sllicone-based and should never be

Mixed with any other DOT fluid.
Standards: Minimum Boiling Points by Brake Fluid Type

2. BF100/BF200 with Non-Slip Design, Fit for hand operate, easy to use

3. BF100/BF200 with Removable Battery Cover, Easy to replace the batteries energy save design.

4. BF100/BF200 with Universal Probe, Durable and can be twisted, convenient and fiexible.

5. BF100/BF200 High Sensitivity Probe

With advanced high-quality sensors, it is highly sensitive and quick to respond, convenient to use.
QUICK RESPONSE
HIGHLY SENSITIVE SENSOR
FLASHLIGHT

Tips: Please wipe the probe cleanly after each test to improve the service life!

6. BF100 with highligh 3 Color LED Display, 5 Level Brake Fluid Status

7. BF200 with screen , can know the detailed more Clearly

8. BF200 supports Sound Alarm

When the moisture content of the brake fluid is detected to exceed the standard, alarm will be sounded to replace the brake fluid.

BF200 Brake Fluid Tester Advantages:

1. BF200 Water Content Description:

LCD display the test result to tell you the quality of brake fluid.

To DOT3 : lower than 1% High Purity
To DOT4 : lower than 2% Status is acceptable
To DOT5 : higher than 4% Need to Replace

TIPS:
In order to ensure good braking performance, It Is recommended when measuring the oil.
Index to reach the range of 23, Please change the brake oll in time to protect your drlving safety.

2. BF200 High Resolution Screen

Display the clear test result even in the dark night, as well as in the brightest day.

BF100 LED Display Explanation:

●Green: The current test brake oil is in good condition.
●Green/ Yellow: Brake oil with less than 1% water content, Brake oil performance is good, you can use it with confidence.
●Green/Yellow/Yellow: Brake oil with about 2% water content, still able to work.
●Green/ Yellow/ Yellow/Red: Brake oil with about 3% , It is recommended to replace the brake fluid.
●Green/ Yellow/ Yellow/Red/Red: Brake oil with at least 4%, replacedimmediately.

BF100 5 Status Explanation

With multiple LED indicators, the measurement results are more accurate and more convenient to use!

Red: Brake oil with at least 4% water content
Red: Brake oil with about 3% water content
Yellow: Brake oil with about 2% water content
Yellow: Brake oil with less than 1% water content
Green: Without water good condition

BF100 Simple Button

Single button with multi-functions!

A: Long press 3 sec for Power On/ Off
B: Long press 2 sec Turn the flashlight On/Off
C: One press for oil type select

How to Operate The BF100/BF200 Brake Fluid Tester ?

1. HOW TO USE:
●Step 1: Put 2 pcs AAA batteries into main unit.
●Step 2: Deep press the power button for 3 sec to power ON the unit.
●Step 3: One press the power button to select the current oil type.
●Step 4: Insert the test probe into the brake fluid (wipe the probe clean, otherwise it will affect the results) Detect the result by LED display.
●Step 5: Hold pressing power button 2 seconds to turn on / off the LED flashlight.
●Step 6: Deep press the power button for 3 sec to power OFF the unit.

2.TIPS:
●Tip 1: After each test, please wipe the probe clean to avoid the residual stains affecting the next use
●Tip 2: If device not use for a long time, it is recommended to take out the battery and store the product in a dry place.

Brake Fluid Tester Pen Instructions:

Brake oil testing is according to the variation of electrical conductivity to determine the moisture content of the brake oil changes. It through the light-emitting diodes (leds) clearly shows the degree of moisture content, high moisture will lead to the boiling point is reduced, affect the braking performance. Red said brake oil need to be replaced immediately, green said to be in good condition, yellow said state fair, but is going to change.

>>Green LED lamp = brake fluid H2O < 1.5%

>>Yellow LED lamp = brake fluid H2O = 1.5%to 3%, can continue to use, after 6 months to detect again

>>Red LED lamp = brake fluid H2O > 3%, brake fluid can not continue to use, need to be replaced

>>Red LED: change brake fluid

>>LED red flicker: replace the battery

>>LED yellow: low moisture content, check again after six months

>>LED green: brake fluid line / cell line

Packing List

1pc * Brake Fluid Tester

The Parameters of BF100 Brake Fluid Tester :

Product Name : Brake oil detector
Model : BF100
Material : Industrial grade ABS material
Display : Three-color LED light display
Color : Black
Battery : Battery No.7 (2 sessions)
Test Range : DOT3、DOT4、DOT5、DOT5.1
Temperature : 0-60°C
Product Size : 6.73inch *1.56inch *0.87inch
Weight : 71g
Be Applicable : All vehicles

The Parameters of BF200 Brake Fluid Tester :

Product Name : Brake oil detector
Model: BF200
Material: ABS
Size: 6.14 inch*2.17 inch*0.94 inch
Temperature: -10°C~50°C
Battery: 2 pcs AAAA batteries (not included)
Test Range: DOT3、 DOT4、DOT5.1
Display: High resolution screen
Color: Gray and black