- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
Your shopping cart is empty.
Cart Total: $0.00
Proceed to Checkout
Item specifics
Product Description
Brake Fluid Tester Pen Brake Liquid Tester 5 Leds Brake Testing Pen Auto Brake Accurate Oil Quality Check pen for DOT3/DOT4/DOT5
1.Quick and easy way to test for moisture content in the brake fluid; results appear in seconds! 2.LED light indicators show percentage of water in the brake fluid 3.Calibrated for cars using DOT 4 brake fluid only (found in most cars produced since 2006) 4.Only takes seconds to know the results To Check Fluid Quality: Press the button for power on, green LED will light up. Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs. Auto power off.
2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester. 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid. 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly. 5. The tester will automatically power off after 12 seconds of inactivity. Indications: Yellow: Less than 1% of Water Content in Brake Fluid Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid; The Brake Fluid Should be Changed Yellow/Yellow/Red/Red: at least 4% of Water Content in Brake Fluid; The Brake Fluid Must be Changed Urgently, Extreme Danger . Caution: This brake fluid tester is calibrated for DOT 4 brake fluid only, which is used in most cars produced since 2006. Package including: |