VXDIAG VCX NANO For GM OBD2 Code Scanner Auto Diagnostic Tools for GDS2 ECU Programming Car Diagnosis For Chevrolet

*VXDIAG VCX NANO device is an professional diagnostic tool, it support car year 2005-2020 for GM car.
*The device also can support to work for Chevrolet, for Cadillac, for Buick, can support some model for Opel, for Saab.
*This OBD2 scanner's advantage is not only support to do the All system diagnostic, but also support to do ECU programming, coding, Multi special functions( Airbag reset, EPB/SAS/BMS/TPMS/DPF,etc),
Action test, etc, the function like the original device.
*The license of the device can free update for the lifetime.

This VXDIAG VCX NANO support For Tech2Win and GDS2, It can instead of original tool of MDI2 Scanner.
Notice:We are not support to provide the original software, please buy it in the legal channel.

*ECU Programming&ECU Coding

--Support to do online programming,coding in online Service Programming System(SPS).

You need an online account

--Increase reprogramming speed 20-70% and get ready to service new models

For pass-through programming of electronic control units on all vehicles built since 1996 and future model releases. The VCX Nano Prime For GM KIT is between 20% and 70% faster than Tech 2.For example, on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.

Notice: We are not support to provide the online account

*Support J2534 Protocol
--Standard OBD2 automotive diagnostic equipment, support J2534 and ISO 2290 PDU protocols

*WIFI/USB Connection
--The device need to work with laptop,you can connect the device to your laptop via the USB cable or WIFI
--The USB version device only can connect it to the laptop via the USB cable,The WIFI version device can connect by USB and WIFI.

*Computer windows system requirement
--Tech2win support to work on windows 7 32bit system
--GDS2 support to work on windows 7 and windows 10 system(not support Home system)

*Free to update device license and firmware
--The device include the license,you are not need to pay the license again,if the license time was expried,you can directly update it in our driver app'VX-Manager".

All System Diagnosis

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live datafor various vehicle control systems, such as ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system,Light system, Wiper System etc.

*EPB (Electrical Park Brake system):
Help to maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assist with brake fluid control, opening and closing brake pads and setting brakes after disc or pad replacement, etc.

*SAS(Steering Angle Sensor) :
Support to perform calibration for the Steering Angle Sensor which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.

*TPMS (Tire Pressure Monitoring System):
Suppot to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

*ABS(Antilock Brake System)
Perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System.

*ECU(Electronic Control Unit)
Reading the retrieved ECU information in detail.

*DPF Regeneration(Diesel Particulate Filter) :
Support to carry out numerous functions to the Diesel Particulate Filter system.

*BMS (Battery Maintenance System:
Re-match the control module and motoring sensor for battery detecting more accurately,clear original low battery information and prevent the related control module from detecting false information.

And Many More system…

Service Functions

For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust,battery matching,gear information learning,injector coding, DPF regeneration,headlight matching, gearbox learning, suspension matching ,Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOx reset,start-stop setting, language setting, seat calibration, shielding failure, etc.

*Oil Lamp,Oil Reset
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

*Electronic Parking Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

*Steering Angle Calibration
Helping clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

*ABS Bleeding
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

*Tire Pressure Monitor System Reset
This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.

*Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

*Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off.

*Battery Maintenance System Reset
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

*Diesel Particulate Filter (DPF) Regeneration
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

*Electronic Throttle Position Reset
This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

*Gearbox Matching
1. This function can complete the gearbox self-learning to improve gear shifting quality.
2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

*AFS (Adaptive Front-lighting System) Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting
angle while monitoring the vehicle speed and body posture.

*Sunroof Initialization
This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

*Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.

And many more function..

*Full OBD2 Function

1.Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs).

2.Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

*AUTO Read VIN

Quickly to read vehicle vin and run diagnostic on the selected system that allows technicians or repairmen to easily identify vehicle information,

such as manufacturer model,year and place of manufacture, etc.

*Action Test

Active Test The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time.

Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.