1. Before repairing, touch where the pit or seam is. The pit needs to use the bracket as an auxiliary tool, but you need to be careful when using this. Just keep it loose
2. Pressurize the glue into the pit, screw it in and out once, stay for about 1 minute each time, and repeat the operation 4-5 times.
3. Before curing, it cannot be repaired in the sun. It can only be repaired in the underground garage. If there is no garage, it can only be blocked with cardboard in a place without sunlight. (It is recommended to buy an ultraviolet lamp, which can be replaced directly with an ultraviolet lamp, and it can be repaired at night if there is an ultraviolet lamp)
4. To cure is to remove all tools, and then drop 1 drop of glue on the damaged part, cover the film, and move the car to direct sunlight.
5. The UV light is irradiated for at least about 15 minutes, and the glue can slowly solidify from the liquid. You can observe it until the glue is not liquid.