Colored Display 36v-96v Speedometer Battery Level Voltage Indicator Electric Scooter Bike MTB Tricycle Mobility Part Instrument

this one is simple for install, and shell is waterproof.

this is LCD display for electric scooter, electric bicycle, balance bike, electric motorcycle, tricycle , MTB with lithium battery and motor , pedal motorcycle and so on.

it has a new shell now from 2019 ,April

its main function:indicate

frontlight,

left and right turning,

speed(default setting this display takes phase voltage wire signal,  connect the purple speed wire directly with your motor/controller phase wire, it will read speed.

we have hall sensor speed wire for standby, please choose only one to connect,--if need hallsensor wire please leave message.)

temperature, --optional --if need hallsensor wire please leave message.)

voltage, (both digital

battery level.

single trip(clear zero when power off)

odometer(indicate this when machine open after 3-7seconds. will not clear zero if power off)

time

POsitive and negative automatic identify.

warrenty one year/

(attention: temperature and time and voltage will be indicated together, and odo will be indicated after 3seconds of machine openning and then is single trip distance.)

attention please

please order at the rated voltage of battery ,

usually for 72v, undervoltage proteciton is 62/63v

for 48v , low voltage protection 41v,

60v , low voltage protection is 52v,

the tolerance is +/-0.5v

this link is for colored background light display, if need other two model (white or blue screen) please order in our store,--shell size 118*75*20mm. display screen size 85*37mm,it support mile per hour-BRITISH type speed unit, if need please leave message in advance. DEFAULT setting speed is kilometer /hour , and wire length 35cm- 50cm.

blue screen

WIRING

RED-power POSITIVE

black(or green)-power negative

blue-frontlight

purple-speed , phase speed testing.

orange -left turning signal

light blue-right turning signal

yellow/pink is for hallsensor speed,  *(hall speed or phase wire speed u can only choose one)

see this location and sequence. if yours are different can try to change by using a thin iron stick.

how to connect the speed wire

ways 1.  connect speed wire of display with speed wire of your controller

2.  with your motor or controller phase wire

3. with your  controller or motor hall sensor wire

4. use a speedtest sensor,  connect it with speed  test sensor and then connect speed sensor with your controller.

remaks: 1  usually for vehicle that is mechanical speed/ no speed/ no gear/ controller has only one speedometer wire, we takes phase wire connection.

2,  if your old bike has no speed wire, canpullone from display and connect with controller.

for vehicle that is 3speed, ... you need to change to hall sensor speed tesing

you can not use both of them.

if any of this ways will not work,

--if your motor has no hall sensor and if phase wire will not work, please you can also add a speed sensor on controller and connect the display to speed sensor.

for content of display can made to customer need, please leave message if you are interested. and can add your logo.

the product with customer logo is for show only, we cannot send you same one.  most products will be no logo for default setting.