** Important notice:

The EL glow gauge is emitted by AC voltage, the inverter will transform the 12VDC to 50~75 VAC.

After connecting to power, don't touch bare terminals or solder points over the out put side, will cause uncomfortabel electric shock.

The natural color of EL (electro-luminescent ) is between blue and green, we design the inverter with high and low frequencies, the high frequency will emit the EL to glow blue color, and the low frequency will emit EL to glow green color. A switch on the dimmer allows you to change frequency /color. However a disadvantage of the design for blue glowing will cause high frequency noise. There is no solution to remove the noise but can minimize the noise by decreasing the brightness or switching to green light section. If the glow gauge is white light, the high frequency will emit cold white, and low frequency emits warmer white light.

Before purchasing this item, please consider this fact.

Specification:

Input: 12V (+/- 10%)

Output: 60 VAC (+15%/ -10%)

Frequency: 1200Hz (+/- 20%); 400-500Hz

Input: 185mA/DC Max

EL size: 600-800 sq.cm

Operating temp. -40~+90 (C)

Storage temp. -40~+90 (C)

Type 1: 

Dual color, high and low frequencies interchangeable with brightness dimmer.

High frequency (blue light / cold white light)

Low frequency (green light / warm white light)

Type 2:

Single color, with brightness adjustment dimmer.

Low frequency (green light / warm white light)