T300 Auto key programmer Spainish/English Newest version V21.9 universal car key transponder

Spainish Verison: V21.9

English Version: V21.9

NOTICE BEFORE ORDERS:

1. Each item has been strictly test before shipping,please don’t worry.

2.Choose shipping by China Post ordinary Small Packet Plus,No track info (Can't Monitor) after dispatch from China. If you want item be tracked,please pay extra money to Choose China post registered air mail.

3.For Russian Customers:According to the regulations of Russian Customs on clearance of commercial parcels,please fill in your passport information and personal tax number,otherwise the order can't be sent,please pay attention.

4. T300 need password,English(Password 123456),Spanish(Password 684234). Do not put wrong password for 3 times at the same time,otherwise the machine will be locked,you need send back to us for repair.

5. T300can not support T-oyota G chips,or all key lost. Not good at do for FORD and for G-M Holden.

Buyer Tips:

1.For Customs Value we always put low value on parcel,if buyer have special request please leave message on order ,thus we will declare the value you wished.

2. Item CD may be easily broken in shipping. If CD can’t be read,please DO CONTACT us to send you download link,DO NOT DISPUTE and Negative Feedback. If buyer can not accept this ,please do not order .

3.Please close anti-virus programmer when install software,Otherwise exe/zip/rar file will be attacked delete. Please take easy,software in CD are safe to your computer.

4.If no receiving package but the protection time is ending soon,please contact me to extend buyer protection time.

5.If you give us 5 stars positive feedback and send me screenshot of feedback,I will directly return $1 as thanks.

T300 Auto Key Programmer Highlights:

1.Latest version:T300 V21.9

2.English/ Spanish Optional

3. No Tokens Limitation

Four Blue-black selectivity

5. Support multi-brand cars before 2007 very well.

6. Support Use Video  Technical Help by TeamViewer

T300 Auto Key Programmer Functions:

1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
Four. Read IMMO /ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
Ten. ECU -IMMOBILISER programmes
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implement

T-300 Key Programmer Install Steps:

VW Transponder key matching with 5 digits Login Code

Procedure for adding transponder keys to vehicles with separate Immobilizer box:

Switch ignition ON with new key. Select: Immobilizer - Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example,if your Login is 1234,enter 1234.
Save
Go to Adaptation
Enter 01 and Channel Number
Enter
The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched,- for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.

Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:

Switch ignition ON with new key. Select: Instrument - Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example,if your Login is 1234,enter 01234.
Save
Go to Adaptation
Enter 21 and Channel Number
Enter
The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched,- for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.

T300 Supports Car List:

For Acura,for Audi,for Alfa,for Chevrolet,for Citroen,for Daewoo,for Fiat,for GM,for Honda,for Hyundai,for Isuzu,for Infiniti,for Jaguar,for Kia,for Land Rover,for Lancia,for Lexus,for Lincoln,for Mazda Japan,for Mazda USA,for Mercury,for Mitsubishi,for Nissan,for Peugeot,for Renault,for Rover,for Seat,for Skoda,for Suzuki,for Toyota Japan,for Toyota USA ,for Volkswagen and for VW/Audi (Pin code reading) .

T300 Key Programmer Install Steps:

For VW Transponder key matching with 5 digits Login CodeProcedure for adding transponder keys to vehicles

with separate Immobilizer box:Switch ignition ON with new key. Select: Immobilizer - Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example,if your Login is 1234,enter 1234.
Save
Go to Adaptation
Enter 01 and Channel Number
Enter
The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched,- for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.

Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:Switch ignition ON with new key. Select: Instrument - Login

Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example,if your Login is 1234,enter 01234.
Save
Go to Adaptation
Enter 21 and Channel Number
Enter
The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched,- for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.

Major Units of Automotive Key Programmers
1. for HDS 16 Adaptor
2 .for SUZUKI Adaptor
3. for MSUBISHI Adaptor
4. OBDII-16 Adaptor
5. OBDII-16 POWER Adaptor
6. 2x2 Adaptor
7. for HDS 3 Adaptor
8.. For Nisan OBDII
9. For Nisan 14
10.For Nisan adaptor
11. For Chrysler-1 adaptor
12. For Chrysler-2 adaptor
13. 12 adaptor
14. OBDITIONS FOR MB SPRINTS

15. ADC 145 Adapter

16. For Peugot Adapter