Color	as photo
as photo

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name BYGD
Origin CN(Origin)
External Testing Certification NONE
Hardware Version USB ELM327
Item Length 8.8cm
Certification NONE
Special Features Other
Software Version USB ELM327
Item Width 4.6cm
Model Name /
Electronic No
Item Height 2.5cm
Power /
Material Type Plastic
Item Type Car Diagnostic Cables and Connectors
Item Weight 0.11kg
Voltage 12V

Product Description

Technical Details:
1.Latest ELM327 version for greater F.o.r.d compatibility
2.Manufactured modification to include a switch to connect to different CAN buses
3.Designed for FORScan software
4.Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more 4MS CAN bus and HS CAN bus support 5Drivers and instructions included

Product Introduction:
One ELM327 OBDII OBD2 USB with switch. Designed for communicating with F.o.r.d, for Mazda, for Lincoln and for Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.

Basic Features:
Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Run tests
Services procedures
Program certain models

Pin Configurations:
Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11Supported Software:
FORScan
Elmconfig
FoCCCus
FF2
Plus more
Modified EML:
Please note that many F.o.r.d and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN
is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

Supported Vehicles:
All for Ford, for Mazda, for Lincoln, for Mercury vehicles that can be addressed using an ELM via an OBDII connector.Supported Protocols:
for FORD HS CAN
for FORD MS CAN

Other Details:
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.

Packing List:
1 * ELM327 OBD2 bluetooth diagnostic interface
1X CD