Host Parameters:

1.Working voltage: 36V-48V-60V-64V-72V
2.Quiescent current: <5mA
3.Maximum working current: <80mA
4.Working frequency: 315MHZ±0.5MHz
5.Speaker alarm volume: >125db

Remote Control Parameters:

1.Battery voltage and model: 3V CR2032
2.Working current: <7mA
3.Working frequency: 315MHZ±0.5MHz
4.Remote control distance: within 150M (open area)

User Manual

① Alarm Key:
1. Press the button once, the horn will beep once, and enter the anti-theft state after 3 seconds. The alarm work when the vibration is received for the first time, and the horn will beep 4 times, if vibration is continued, the alarm will continuously beep.
2. If you see someone try to steal your vehicle, please long press the alarm button within the remote control range, the horn will give a strong alarm and cooperate with the controller to lock the motor quickly.

② Unlock Key:
Press the key once, the horn beeps twice, and the anti-theft state is released.

③ Search Key:
press the key once, the horn will beep 7 times, tell the owner the vehicle location, press any key to exit this state.

④ Start Key:
1.Press the button once to enter the mute defense. In this state, the horn does not make any sound and only lock the motor.
2.Press the button twice, the horn will beep, turn on the power of the vehicle, you can do keyless driving. Press the unlock key to exit.

⑤ Over-speed Function:
If sometimes the alarm beep when you driving, it's because you are over-speed, as to what speed is over-speed, it is determined by your motor setting.

2P+4P3 Connector Alarm

3M connector Alarm

6P connector Alarm

Host Size Information

Size: 50mm*32mm/1.96*1.26"

How to choose connector ?

If your controller have this type of 5 pin or 6 pin connector, please choose 6P connector alarm to match, if the wire is not matched, please adjust the cables in the alarm connector to make sure black wire connect to black wire, red to red, etc.

If your controller has 2 plugs as photo, please choose our 2P 4P3 connector alarm. if the wire is not matched, please adjust the cables in the alarm connector to make sure black wire connect to black wire, red to red, etc.