Note：

This product contains 11 options, all options only support Kunteng controller, 24V 36V 48V 250W 350W 500W 750W 1000W 1500W KT controller.

12 Magnets PAS Sensor

Type : PAS Sensor

Installation : Left

Voltage : Use with 24V / 36V / 48V contoller

Magnet : 12 Magnets

Cable Length : 90cm not include the sensor and connector

Connector : 3Pin SM Connector

Corresponding time when brake:<0.001S

Corresponding distance:2-3mm

Hall Electric Life:>20M times

Attention before order:

For LCD display, if your original PAS is 8 magnents,please set the parameter C1=07.

For LED display, you need to choose the same magnets as before.

Adaptable controller:Kunteng/Lishui/Jiannuo controller

Important notice of KT display:

KT LCD3 LCD4 LCD5 EBike LCD Display are for Kunteng Series Controllers. It only fits KT series controllers. It is not suitable for other controllers.

1. Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.

For 24V battery, LVC=20V, P5/3.77=1.

For 36V battery, LVC=30V, P5/3.77=1.5.

For 48V battery, LVC=40V, P5/3.77=2.

You can adjust P5 parameter by your own battery discharge curve.

Specifications:

1. Data display:it shows the riding speed, a single mileage and cumulative mileage, riding time, power-assist gear, motor power and temperature, battery voltage and charge status, brake status and the used ambient temperature and other cycling parameters;

2. Intelligent power:a true reflection of the battery charge, real-time recording of the power consumption to ensure riding mileage;

3. Stalls setting:multi-gear switch and automatic save of the power-assist gear, and it can restore power-off stall state when turned on;

4. Parameter setting:with a number of user parameter setting functions, motor parameters, velocity measurement parameters, speed-limit parameters, power parameters, power-assist control parameters, the minimum controller voltage and maximum current parameters and other operating models for settings adjustment ;

5. Data view:Users can view historical driving data and clear accordingly, view single or cumulative riding time, riding mileage, maximum speed and average speed of single riding;

6. Vehicle boosting:With 6Km/h power-assisting functions, the boost logo flashes during boosting, and riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy;

7. Cruise and constant speed:With the setting and display of the cruise, achieving to automatically maintain the vehicle speed, so that the vehicle drives at a constant speed;

8. Night driving:With the functions of LCD backlit display and headlight switch control, instrument backlighting and headlights can be turned on during driving at night;

9. Password setting:With three-bit of power-on password setting;

10. Automatically prompt:For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of vehicle. With a temperature display for motor operation and it is to achieve the ultra-temperature alarm and motor protection;

11. Use five-line of digital communication, the instrument has good compatibility and interchangeability, different instruments can be conducted the data exchanges and parameters copy directly;

12. Host part and operation buttons of the meter use sub-structure design, making the operation to be more reasonable and convenient;

13. Supply voltage of 24V, 36V, 48V can be automatically identified and compatible;

14. Black housing

About Ebike Display LCD5

1. Dimension: 16.5x51x77mm.
2.Supply voltage of 24V, 36V, 48V can be automatically identified and compatible;
3.SM Cable Length: 160cm

About Ebike Display LCD4

1.Dimension: 19x54x10mm.
2.Supply voltage of 24V, 36V, 48V can be automatically identified and compatible;
3.SM Cable Length: 160cm

About Ebike Display LCD3

1.Cable Length: 180cm
2.This electric bike display connector is not waterproof.
3.Work voltage:DC 24V 36V 48V

Julet 9Pin Wheel Motor Extension Cabl

* This is motor extend cable with Female and Male 9pin connectors.
This cable is a convert cable.Make your motor (waterproof connector) convert to the SM connector.And it can extend the length.

* Waterproof cable Length: 60cm
SM cable Length：60cm

* Color: Black(as pictures show)

* Please check pictures for connector compatibility before your purchasing.

* Voltage :12-72V

* Plug:9 pin

* Usage:Ebike,Electric Bicycle

Ebike brake sensor:

1.Connector:Male SM 2 Pin

2.Cable length:165cm

3.Application type:Hydraulic or Mechanical Brake

4.Compatible with KT controller and other brands.

Ebike Thumb Throttle

Type:130X Thumb Throttle

Voltage:24V 36V 48V

Wire length:160cm(SM)

Plug:3 Pin SM Connector

Installation:Left/Right

Weight:100G

Ebike Twist Throttle

Type:Twist Throttle

Voltage:24V 36V 48V

Wire length:150cm(SM)

Plug:3 Pin SM Connector

Installation: Left / Right

Weight:195G

Ebike Brake Lever

Type:Ebike Brake Lever

Voltage:24V 36V 48V

Wire length:150cm(SM)

Plug: 2 Pin SM Connector

Installation: Left and Right

Weight:270G

Material: aluminum alloy

KT-LCD3 / LCD8 Display Bracket

Material: ABS
Adaptation: KT-LCD3 / LCD8 Display