Notice:

1.This Controller work with sensored Brushless DC motor and Kunteng LCD only. This ebike controller is not suitable for scooters. 2.Work voltage:24V or 36V Universal (support both voltage) 3.Suitable for Brushless Gear Hub Motor 24V~36V 250W/350W 4.This one is Square Wave Controller.

Specifications:

1.Mosfet:6 mosfet 2.Work voltage:DC 24V or 36V 3.Rated current:8A 4.Low voltage proection:DC20/30±0.5V 5.Max current:17±1A 6.Speed set: 1-4.2V 7.Size:94*61*36mm

Details:

-Phase cable(3pcs) connect with motor -Hall sensor wire -Battery cable(XT60) -Throttle -PAS Sensor -Speed sensor -Brake connector (2pcs) -Light connecotr 1(Output power only 3W) -Light connector 2(Output big,connect battery directly) -Electric lock -Display -Back up -Cruise

Important notice of KT display:

KT LCD3 LCD4 and LCD5 EBike LCD Display are for KT Series Controllers. It only fits KT series controllers. It is not suitable for other controllers. 1. Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77. For 24V battery, LVC=20V, P5/3.77=1. For 36V battery, LVC=30V, P5/3.77=1.5. For 48V battery, LVC=40V, P5/3.77=2. You can adjust P5 parameter by your own battery discharge curve.

Specifications:

1. Data display:it shows the riding speed, a single mileage and cumulative mileage, riding time, power-assist gear, motor power and temperature, battery voltage and charge status, brake status and the used ambient temperature and other cycling parameters; 2. Intelligent power:a true reflection of the battery charge, real-time recording of the power consumption to ensure riding mileage; 3. Stalls setting:multi-gear switch and automatic save of the power-assist gear, and it can restore power-off stall state when turned on; 4. Parameter setting:with a number of user parameter setting functions, motor parameters, velocity measurement parameters, speed-limit parameters, power parameters, power-assist control parameters, the minimum controller voltage and maximum current parameters and other operating models for settings adjustment ; 5. Data view:Users can view historical driving data and clear accordingly, view single or cumulative riding time, riding mileage, maximum speed and average speed of single riding; 6. Vehicle boosting:With 6Km/h power-assisting functions, the boost logo flashes during boosting, and riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy; 7. Cruise and constant speed:With the setting and display of the cruise, achieving to automatically maintain the vehicle speed, so that the vehicle drives at a constant speed; 8. Night driving:With the functions of LCD backlit display and headlight switch control, instrument backlighting and headlights can be turned on during driving at night; 9. Password setting:With three-bit of power-on password setting; 10. Automatically prompt:For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of vehicle. With a temperature display for motor operation and it is to achieve the ultra-temperature alarm and motor protection; 11. Use five-line of digital communication, the instrument has good compatibility and interchangeability, different instruments can be conducted the data exchanges and parameters copy directly; 12. Host part and operation buttons of the meter use sub-structure design, making the operation to be more reasonable and convenient; 13. Supply voltage of 24V, 36V, 48V can be automatically identified and compatible; 14. Black housing

About Ebike Display LCD5

1. Dimension: 16.5x51x77mm. 2.Supply voltage of 24V, 36V, 48V can be automatically identified and compatible; 3.Cable Length: 160cm

About Ebike Display LCD4

1.Dimension: 19x54x10mm. 2.Supply voltage of 24V, 36V, 48V can be automatically identified and compatible; 3.Cable Length: 160cm

About Ebike Display LCD3

1.Cable Length: 180cm 2.This electric bike display connector is not waterproof. 3.Work voltage:DC 24V 36V 48V