①Battery ②Light ③Self study ④Electric Lock

⑤Lcd Display ⑥Throttle ⑦Hall sensor ⑧PAS senosr

⑨Phase ⑩Brake*2①Throttle ②BrakeLight ③PAS senosr ④Battery

⑤Hall sensor ⑥ Lcd Display⑦ Electric Lock⑧Light

⑨Phase

The color of outgoing lines may be different due to different batches

500W without learning line, automatic 120 phaseElectric Bike Controller 24V/36V/48V 250W/350W/500W Brushless Controller with LCD Display Panel for Electric Bicycle e-bike scooter

Features:

• This display adopts good quality materials, lightweight, rainproof, sturdy and durable.

• LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.

• The controller is brushless type, working silently and sensitive to the state of electric bike.

• Easy to install and use, comes with mount for LCD display and suitable for 22.5mm handlebar.

• Suitable for electric bicycles, scooters.

250W/350W

Controller Size: Approx. 9 x 5.3 x 3cm

500W

Controller Size: Approx. 12 x 5.3 x 3.3cm

P01: meter backlight , 1 Lowest, 3 Brightest.
P02: Mileage unit，0：KM；1：MILE
P03: Voltage level, Base operating voltage;
P04: Sleep Time. 0: No Sleep, Other Numbers Are Sleep Time, 1-60 Minutes.
P05: Assist position,0:3,1:5,mode;
P06: Wheel Diameter, unit: inch；Accuracy：0.1
P07: Number of speed magnets , range ：1-100
( Note: here only for set speed display, doen’t affect the actual speed)
P08: Speed Limit, Range：0-50km/h，50: means Unlimited speed;
(When speed big than setting speed, Turn off the PWM output)
P09: Zero or non-zero start, 0: zero start
1: non-zero start; P10：Drive Mode setting
0: Power Drive, throttle invalid; ( Assist power)
1: Electric throttle Drive mode, Assist invalid;
2: Both assist and throttle are effective;
P11: Boost sensitivity setting, range：1-24； P12: Boost start strength setting, range：1-5； P13: PAS Assist Type Setting.( 5/8/12) Single Hall PAS : set to 5 /8 Double Hall PAS : Set to 12 P14 :P15:Not opened functions;
P16：spare;

P17：ODO clear; long press up button 5 seconds to clear;

Note:

Each cable is labeled with color for different uses.

Red: power positive electrode

Black: power negative electrode

Yellow: power output

Brown: lamp positive electrode

White: lamp negative electrode

Blue: indicator signal

Green: signal receive