Note：The throttle interface and the controller throttle interface are not made by the same factory. The line sequence of this wiring port is not a perfect match. The buyer needs to adjust the line sequence by himself, so that the same color line sequence can be connected to each other.

24-36V 350W 12-18A brushless controller function:

1. hall line

2. 3-speed

3. brake light

4. PAS(pedal assist )

5. low level brake

6. cruise

7. throttle

8. headlights, taillights

9. self-learning line

10. electric door lock（Ignition Switch）

11. Phase Velocity Meter

12. battery （red battery+，black battery-）

13. motor （3 phase wire）

how to connect ？

1.connect the motor line (color to color）

2. connect the battery line(red wire :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

24-36V 350W 12-18A brushless controller function:

1.electric lock

2.electric brake（low brake）

3.brake light power line

4.LCD instrument line

5.self-learning

6.PAS

7.throttle

8.USB charge

9.headlight power line

10.cruise

11.3-speed

12.hall

13.battery

14.motor

how to connect ？

1.connect the motor line (color to color）

2. connect the battery line(red wire :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.