ELM 327 USB Bluetooth-compatible Works On Forscan HS CAN /MS CAN V1.5 Car OBD2 Diagnostic Tool ELM327 USB FTDI OBD2 Scanner

Attention:

This link has 3 version, Bluetooth-compatible version, USB version, WIFI Version Please make sure you choose the right one when you order it.

Type 1 ---Bluetooth-compatible version:HS CAN/MS CANswitch+No  FTDI chip

Type2 ---- USB version:HS CAN/MS CANswitch +FTDI chip

Type3 --- WIFI Version : V1.5 PIC18F25K80 chip + No FTDI chip

Type4 --- Bluetooth-compatible Version : V1.5 PIC18F25K80 Chip + No FTDI chip

Only  Support Windows XP and WIN7 32bite !!

*This one can't support 24 V Diesel vechicles. Only support 12V petrol and diesel cars.

Support Language:

English,Germany,Greek,Spanish,French,Serbian.

Type 1:Bluetooth-compatible version: With PIC18F25K80 Chip, no FTDI

TYPE 2 : USB Version: With PiC18F25K80 Chip and FTDI

Technical Details:

1Latest ELM327 version for greater compatibility
2Manufactured modification to include a switch to connect to different CAN buses
3Designed for FORScan software
4Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more
4MS CAN bus and HS CAN bus support
5Drivers and instructions included

Product Introduction:

One ELM327 OBDII OBD2 USB with switch. Designed for communicating with F.o.r, for Maz, for Lin and for Mer vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.

Basic Features:

Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Run tests
Services procedures
Program certain models

Pin Configurations:

Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11

Supported Software:

FORScan
Elmconfig
FoCCCus
FF2
Plus more

Modified EML:

Please note that many F.o.r and Maz models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus.

In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins.

This ELM327 has been modified to allow it to implement the MS CAN bus.

ELM327 supports HS CAN from the stock, because for F.o.r.d HS CAN completely matches to the OBD2 standards.

It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

Supported Vehicles:

All for For, for Ma-, for Lin-, for Mer vehicles that can be addressed using an ELM via an OBDII connector.

Supported Protocols:

for F.O.R.D HS CAN
for F.O.R.D MS CAN

Other Details:

Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.

Packing List:

1 X ELM327 OBD2 diagnostic interface

1 X CD

Bluetooth-compatible version:

USB Version: