1: What is the Versioni of this ELM327 WIFI ?
A1: It's 100% v1.5 from both software and hardware, with full OBD2 Protocols, including commands ATAL and ATTPS commands.

Q2: What is the Chip set of this ELM327 WIFI ?
A2: It's using the high performance pic18f25k80 chip set, 4mhz crystal oscillator.

Q3: Does it work with IOS or iPhone or only for Android ?
A3: Our ELM327 WIFI is working with iPhone, IOS and Android, Windows. All are compatible.

Q4: Does it work can diagnose all the fault code from my car?
A4: the ELM327 can only work on vehicle's engine system, it can read fault code from engine only. Not work with ABS, airbag, or transmission etc., fault codes.



Q5: How to check if my car is suitable for this ELM327 Wifi scanner?
A5: Our ELM327 WIFI V1.5 is suitable for all OBD2/ OBDII vehicles, normally newer than 2009's cars will have no problems. OBD2 standard range for reference: USA car makes should be after 1996; EU Based Car Makes after 2004; Asia Car Makes after 2007

Language:

language will adjust automatically according to your cellphone language

Supported cars list

1. America Car List: (include Brazil)

Need standard obd2 , and release from 2000 years to now

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep



2. Europe Car List:

Need standard obd2 , and release from 2003 years to now

Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot ,

Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover

Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar

Renault cars need after 2009 years,

Does not support Renault / Dacia Logan , Clio.



3. Asia Car List: (include Australia)

Japanese car Need standard obd2 , and release from 2006 years to now

Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda

Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota

Chinese car Need standard obd2 , and release from 2011 years to now

Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

Notice : No OBD2 ELM327 can work for all cars, If the device does not fit for your car, please try to test on another newly car.



Key Features:
• Wireless scanning for tool, support all OBD2 protocols
• Compatible with most OBD II compliant vehicles
• 3000 code definition database
• Read diagnostic trouble codes
• 16-pin socket adaptor for wifi interface
• Built-in indicator lights


Display and read:
• Engine RPMs
• Calculated load value
• Coolant temperature
• Fuel system status
• Vehicle speed
• Short-term fuel trim
• Long-term fuel trim
• Intake manifold pressure
• Timing advance
• Intake air temperature
• Air flow rate
• Absolute throttle position
• Oxygen sensor voltages
• Associated short term fuel trims
• Fuel system status
• Fuel pressure


Specifications:
• Model name: ELM327 OBD2 WIFI V1.5
• Type: Code readers; scanning tools
• Output protocol: Bluetooth
• Color: Black & white
• Materials: Plastic
• Voltage: 12 V
• Current: 45 mA
• Wave frequency: 38400 Hz
• Applicable scope: 5 to 10 m (16.4 to 32.8 ft.)
• Item size: 4.8 x 2.5 x 3.5 cm (1.89 x 0.98 x x1.37 in)
• Item weight: 23 g (0.81 oz.)
• Package size: 8.8 x 8.8 x 4 cm (3.4 x 3.4 x 1.5 in)
• Package weight: 48 g (1.69 oz.)

Software Display

Brake Tester Specification:

1. To check the quality of brake fluid quality

2. 5 LEDs to indicate percentage of water in the brake fluid

3. Automatically power off

4. Operated by a LR03 AAA 1.5V battery.


Indicator Instruction:
1.5 LEDs indicating the water % in the brake fluid:

2.0% light indicates that the battery is OK, no replacement

3.1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.

4.2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use

5.3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.

6.4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.

7.Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your understanding.



Operation Guideline:

1. Unscrew the brake fluid reservoir,and pull off the cap of the Brake fluid tester.Dip the test probes into the brake fluid up to the plastic rim of the device.



2. Press the button for power on,green LED will light up.Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off.The tester will automatically power off after about 15 seconds of inactivity.

Item Pictures