NICECNC Brake Disc Bobbins & Circlip Sets FOR discs from 4.5-5.2 mm Manufactured thickness

These are 10 sets Ti Alloy Motorcycle Brake Disc Bobbin Kits

Only Attempt to fit these if you have the required Engineering skills and tools

Don't throw your own discs in a bin when you can replace the rivets easily in a few minutes

Titanium Alloy Bobbins with stainless steel Eclips,1mm spacer and antirattle washers

The flat spacer measures 20mm OD. 14mm ID. 1mm thick.

Bobbins are 13.75 - 13.80 mm Dia. with a head of 19.6 mm.

Approx 5 grammes per complete bobbin.

Features

Forge Machining 10.9 Grade Titanium Alloy

Rust-free,Anticorrosion,Lightweight,Temperature resistance,Good Performance

Perfect decor to beautify your brake rotor.

Improves your motorcycle's brake performance.

Item specifics

Type : Brake Disc Bobbins & Circlip Sets

Material : Titanium alloy Bobbins,Stainless Steel E-clips and washers

Color : Titanium Gold Blue

Bobbins : 13.75 - 13.80 mm Dia. with a head of 19.6 mm.

Flat spacer : 20mm OD. 14mm ID. 1mm thick.

Weight : Approx 5 grammes per complete bobbin

Package Included

10 sets of Brake Disc Bobbins & Circlip

Discs can vary from 6 - 12 bobbins,Pls place order base on your bike

Fitment

Suitable for discs from 4.5 - 5.2 mm Manufactured thickness.

These are for Semi-floating application but can under certain circumstances be converted to Fully floating.

Some of the discs they will fit are:

Brembo.

Sunstar. (they will show the sunstar Logo on the Carriers).

Galfer.

Braking.

Blackshadow-Uk.

Armstrong.

EBC. (Some Models) Please ask.

Yamaha. (some models).

Triumph. ( some models).

BMW. (some models).

Most Chinese discs

WILL NOT FIT these models 1200 & 600 Bandits. GSXR1100 and most early

suzuki discs. These have 15.8 mm rivet....

Installation Note

Pls contact us to request the video of installation!

If you are unsure if they will fit either message us or make a gauge.

Its easy all you have to do is get 2 shims of thin metal or two pieces of a feeler gauge. sit them under the head of the rivet top and bottom and measure the gap.

Before you do anything to your discs view the Video of installation,If you drill one out and its the wrong size its too late.

This will NOT cure your discs if they are totally knackered and miraculously make them new again.

Basic tools and basic mechanical and engineering knowledge is all that is required.

Grinding the rivet head off with a 12" grinder at a million revs wont work.

Taking your time will!!!!!!

Its not Rocket Science just good old common sense some skill and a bit of care is whats needed.

Remember the rule "Check 10 times Drill once"

Once again remember if you dont have the skill or tools to do this yourself find someone with to correct skill who can do it safely.

Pls contact us to request the video of installation!

If in any doubt CONTACT US.