For bmw CIC system Reverse decoder module for mini cooper countryman clubman reversing image car camera interface 2011-2016

Function:

-Upgrade reversing image or 360 panoramic

Applicable models:

BMW mini Cooper,mini countryman,mini clubman 2011-2016

Please refer to the following central control picture to distinguish whether it is suitable for installation

Please note: If your car has a manual configuration,there is no dynamic track after installation，and there is no radar sensor display, place an order to indicate acceptance. please leave a note, because the software is different, we will refresh the software before shipment, otherwise we will default to the automatic transmission

Support System:

CIC system with 4 pin The original car central control picture must be the same as following picture before it can be installed

If it is a central control like the picture below, it is not suitable for installation

Wiring definition

-1:Front View/AV1 In

-2:Video input 2

-3:Rear view input

-4: Green CNA-L,Orange CAN-H

-5: GND

-6: white cable for camera 12V output

-7: Bule cable 360 tirgger

-8: BATT+12V

LVDS conversion host-- Pink plug

Insert the pink wire of the original car into the LVDS output of the decoder

-We match the LVDS cable, one end is connected to the LVDS input of the decoder, and one end is connected to the original car port

In the reversing image system, the power of the camera can be powered by the decoder, and there is no need to connect the power of the reversing lamp

-In the power cord of the decoder, when the vehicle is in the reverse state, the white wire has 12V power output, which can supply power to the camera

How to enter the AV channel:

Long press I-DRIVE "OK button ”3S to enter AV1 channel, long press "OK button" 3S again to enter AV2 channel in AV1 channel

Camera and installation effect

Effect picture after installation:

Product pitures