What's Wrong with the car?

FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII/EOBD Diagnostic Code Reader Tool for Check Engine Light

Car owner always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on , However, they only need to spend dozens of dollars to buy a FOXWELL NT301 OBDII code scanner to solve the problems encountered.
This auto code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop.

Why Choose FOXWELL NT301, what are our advantages?

The Foxwell NT301 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:

1. Gas Cap 2. Oxygen Sensor 3. Air Fuel Ratio Sensor 4. Mass Air Flow Sensor 5. Ignition Coils
6. Spark Plug Wires 7. Spark Plugs 8. Thermostat 9. EGR Valve 10. Evaporatative Emission Canister Purge Valve(EVAP) 11. Catalytic Converter.

What OBD2 Scanner FOXWELL NT301 Can Do For You ?

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

7.Lifetime free upgrade online via USB cable .

8.FOXWELL NT301 Diagnostic Tool Support Languages :

Three multilingual package for options:

(1) English, français, Español, Deutsche and italiano

(2) English, Português, Magyar, Nederlands, svenska

(3) English, русский,

Support Full 10 Engine System Functions ：

1.Read Code:

Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erase Code

Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream:

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream:

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data:

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test:

Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test:

Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information:

Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test:

Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

FOXWELL NT301 Diagnostic Tool Support Car List :

1. America Car List: (include Brazil)
Need standard obd2 , and release from 2001 years to now
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2. Europe Car List:
Need standard obd2 , and release from 2004 years to now
Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot ,
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar

3. Asia Car List: (include Australia)
Japanese car Need standard obd2 , and release from 2006 years to now
Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota

4. Chinese Car List
Chinese car Need standard obd2 , and release from 2011 years to now
Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

NOTE:
for Ssangyong Actyon, Kyron, Rexton, from 2011-2017 years.
for Ssangyong Korando, from 2013-2017 years
for Renault cars from 2016-2018 years.
Does not support for Renault / Dacia Logan , Clio.
Does not support for LADA, UAZ, VAZ

No Car OBD2 Scanner can work for all cars, If the device does not fit for your car, please try to test on another newly car.:

I/M One-Key Fast Check ：

Quick state emissions readiness check and drive cycle verification.

red-yellow-green leds and build-in speaker indicate emissions monitor status,

they can also help catch intermittent problems or confirm repairs during a drive cycle.

FOXWELL NT301 Free Update Forever

Stpe1: Download the update tool from foxwell official website, connect the NT301 to PC and login in the foxwell program , the device will be automatcially detected.

Stpe2: You can go to setting , select the language of your software package.

Step3: Click online update, it will download the software, then click on Offline update, you may install the patch.

Notice:
All of our user manual are English in the package,
But we have French ,Spanish ,German language user manual on the foxwell office website, (foxwelltech.com).
you can download it yourself, thanks

Package Including:

1 x FOXWELL NT301 Diagnostic-Tool
1 x English User Manual
1 x USB cable