Description:

Accelerate new upgrades, seal well and save effort, faster flow rate and double stop valve oil pump, pumping only takes 5 seconds

Double check valve design, faster flow rate, good operation of two-way check valve, quick oil output

Increase the oil-resistant rubber sphere to absorb more water and fine grain design, anti-slip and anti-aging

A variety of models are applicable, trucks, cars, motorcycles and other models can be used

Instructions for use:

The correct way to use the suction pump is to stretch a tube into the liquid you need to pump, and first force it

Squeeze the flat rubber ball to expel the air, then immediately block the outlet of the tube with your thumb, release the rubber ball, etc.

The ball slowly swells and recovers. After the liquid is pumped up to fill the rubber ball, the thumb blocking the outlet is loosened. Repeated operation 1-2 times will form a continuous self-flow.

This oil pump needs to rely on the pressure of air to achieve self-flow, because the inner diameter of the pipe is small and the flow rate is relatively slow.

Directions are used from top to bottom. When using, keep the position of the rubber ball as low as possible.

Note: The following conditions must be met to extract the fuel tank of the car:

1. There is no anti-theft oil filter in the fuel tank

2. The pipe should be inserted into the fuel tank when pumping oil

3. The height of the fuel tank must be higher than the height of the oil drum

Specifications:

For Transfer of Liquids as Gasoline, Diesel, Oil, Water etc.

Material: PVC, Rubber

Quantity: 1 * pipes, 1 *pump

Pipe length: 1M/2MOptional

Note: It is equipped with 1 pipe, which needs to be cut by itself to 2

Pipe diameter: As shown

Package Included:

1 set